Learn How to Drain and Refill Your Arctic Spa in 5 Easy Steps

Are you a proud owner of an Arctic Spa but don’t know how to drain and refill it? Don’t worry, it’s an easy process that you can do on your own. In this article, we will walk you through 5 easy steps to drain and refill your spa, so you can keep enjoying its benefits.

Draining and refilling your spa is essential to maintain its cleanliness and efficiency. Over time, spa water can become contaminated with dirt, bacteria, and chemicals. This can cause skin irritation and even damage to your spa’s components. That’s why it’s important to drain and refill your spa at least once every 3-4 months.

Before we dive into the 5 easy steps, make sure you have all the necessary equipment ready. You will need a garden hose, a submersible pump, a bucket, a soft cloth or sponge, and a water testing kit. Now, let’s get started!

Are you ready to learn how to properly drain and refill your Arctic Spa in just 5 easy steps? By following this guide, you’ll keep your spa running smoothly and avoid any unnecessary issues. Let’s dive into the first step!

Step 1: Prepare Your Spa

Before you can start enjoying a relaxing spa day, you need to prepare your spa. The first step is to gather all the necessary supplies. You will need clean towels, a robe, slippers, and any beauty products or equipment you plan to use during your spa day. Make sure everything is clean and organized before you begin.

The next step is to create a calming atmosphere. You can do this by dimming the lights, playing soothing music, and lighting candles or incense. This will help you relax and forget about any stress or worries you may have.

Once you have everything set up, it’s time to start filling up your spa. Whether you have a bathtub or a hot tub, make sure to add some bath salts or essential oils to the water. This will help to soothe your muscles and provide a sense of calmness.

While you wait for your spa to fill up, take the time to prepare your body. You can do this by exfoliating with a body scrub, applying a facial mask, and giving yourself a manicure or pedicure. This will help you to feel refreshed and rejuvenated.

Finally, once your spa is ready, step in and relax. Take deep breaths, close your eyes, and let yourself unwind. You can even try some meditation or deep breathing exercises to help clear your mind and fully enjoy your spa day.

Check Your Spa’s Manual

1. Locate your manual: Before you start using your spa, it’s important to read through the manual. Locate your spa’s manual and read through it thoroughly. This will help you to understand how your spa works and how to properly maintain it.

2. Check for safety instructions: Your spa’s manual should contain safety instructions that you need to follow. Check for any warnings, precautions, or safety tips that you need to be aware of. This will help you to use your spa safely and avoid any accidents or injuries.

3. Look for maintenance guidelines: Maintaining your spa properly is crucial for its longevity and performance. Check the manual for maintenance guidelines, such as how often to clean the spa, how to drain and refill the water, and how to replace the filters. Following these guidelines will help you to keep your spa in top condition.

If you can’t locate your spa’s manual, don’t worry. You can usually find it online by searching for the make and model of your spa. Make sure to download and read through it before using your spa.

Step 2: Drain Your Arctic Spa

If you are moving your Arctic Spa to a new location or if you need to store it for a longer period, you will need to properly drain the spa to avoid any potential damage. The first thing you need to do is turn off the power supply to the spa to avoid any accidental activation.

Once you have turned off the power supply, locate the drainage spout on your spa and attach a hose to it. Make sure the hose is long enough to reach a safe location where the water can be drained without causing any damage.

Before you begin to drain the water, it is important to turn off the water supply to the spa. This can typically be done by closing the valve located near the main water supply line to the spa.

Now you can turn on the drainage spout and let the water flow out of the spa through the hose. Be patient as this process can take some time, especially if your spa has a large water capacity. Once the water has drained completely, turn off the drainage spout and remove the hose.

After the water has been drained, it is important to clean the inside of the spa to remove any remaining water. Use a towel or a wet-dry vacuum to remove any excess water that may be left in the spa. You can also use this opportunity to clean the spa shell with a mild soap and water to remove any debris or dirt.

Pro Tip: If you plan to store your Arctic Spa for an extended period, it is recommended to add a winterizing solution to the spa to prevent any potential damage caused by freezing temperatures.

Locate the Drain Valve

If you’re having issues with your air compressor, one of the first things you should do is check the drain valve. The drain valve is responsible for removing any accumulated moisture and condensation that may have collected in the tank over time. To locate the drain valve, you’ll need to follow a few simple steps.

The drain valve is typically located at the bottom of the compressor tank. To find it, you’ll need to first ensure that the compressor is disconnected from its power source. Once you’ve done that, locate the tank and check the underside. The drain valve is usually situated at the lowest point of the tank, near the edge of the compressor base.

Some models may have the drain valve located in a slightly different location, such as on the side of the tank or on the back of the compressor. Consult your owner’s manual for specific instructions on where to locate the drain valve on your particular model.

Once you’ve located the drain valve, you’ll want to ensure that it’s functioning properly. This can be done by opening the valve and allowing any accumulated moisture to drain out. If no moisture comes out, you may need to remove the valve and check for blockages or other issues.

In some cases, you may need to replace the drain valve altogether if it’s damaged or not functioning properly. This is a relatively simple process that involves removing the old valve and replacing it with a new one. Be sure to consult your owner’s manual for specific instructions on how to replace the drain valve on your model of compressor.

• Step 1: Disconnect the compressor from its power source.
• Step 2: Locate the tank and check the underside for the drain valve.
• Step 3: Open the valve to allow any accumulated moisture to drain out.

Remember, it’s important to regularly check and maintain your compressor to ensure it’s functioning properly. Checking the drain valve is just one of the many steps you can take to keep your compressor in good working condition.

Step	Description	Action
1	Disconnect the compressor from its power source.	Ensure safety and prevent accidental activation.
2	Locate the tank and check the underside for the drain valve.	Find the valve and prepare to drain accumulated moisture.
3	Open the valve to allow any accumulated moisture to drain out.	Remove moisture and improve compressor efficiency.
4	Replace the drain valve if necessary.	Ensure proper functioning and avoid future issues.

Step 3: Clean Your Arctic Spa

After draining the water and removing the debris, it’s time to give your Arctic Spa a thorough cleaning. First, use a soft cloth to wipe down the interior surfaces of the spa. This will remove any dirt or grime that has accumulated on the walls and floor. Pay close attention to the jets and filters, as these are areas where dirt and debris can accumulate.

Next, it’s time to clean the filters. This is an important step, as dirty filters can cause your spa to malfunction and reduce its lifespan. Remove the filters and rinse them thoroughly with a hose or pressure washer. For a deeper clean, you can soak them in a solution of water and vinegar for several hours. Rinse the filters again before replacing them in the spa.

Finally, clean the cover of your Arctic Spa. Use a mild detergent and a soft brush to scrub away any dirt or stains. Rinse the cover thoroughly with a hose and allow it to air dry before replacing it on the spa. Regularly cleaning your spa cover will help prolong its lifespan and keep it looking great for years to come.

Scrub the Walls and Floor

After removing all the large debris from your home, it’s time to start scrubbing the walls and floor. Start by sweeping and vacuuming any loose dust, dirt, and hair. Dust and dirt can accumulate quickly, so make sure you are thorough.

Next, grab a bucket of warm water and a cleaning solution. There are many different cleaning solutions you can use, such as a vinegar and water mixture or a commercial cleaning product. Disinfecting the surfaces is important to remove any bacteria or germs that may be lingering.

Start by cleaning the walls first, working from the top down. This will prevent any dirty water from dripping down onto a clean surface. Use a soft cloth or sponge to scrub the walls gently, making sure to get into all the corners and crevices. Rinse the cloth or sponge frequently to avoid spreading dirt around.

Once you have finished cleaning the walls, move on to the floor. Use a mop or scrub brush to clean the floor thoroughly, paying extra attention to any stubborn stains or dirt build-up. Don’t forget to clean around the baseboards and corners, as these areas can often be overlooked. Vacuuming or sweeping before mopping can help remove any loose dirt and debris from the floor.

• Use a cleaning solution to disinfect surfaces
• Work from the top down when cleaning walls
• Pay extra attention to corners and baseboards when cleaning the floor

After you have finished scrubbing the walls and floor, it’s important to let everything dry completely before moving on to the next step. Opening windows or turning on fans can help speed up the drying process.

Scrubbing the walls and floor may seem like a daunting task, but it’s an essential part of deep cleaning your home. By following these steps and using the right cleaning supplies, you can ensure that your home is sparkling clean and free from dirt and germs.

Flush and Clean the Plumbing

• Turn off the water supply to your home. This will prevent any accidents while you are cleaning the plumbing system.

• Flush the system by running cold water for 5-10 minutes. This will help remove any debris or sediment in the pipes.

• Check the drainage system for any clogs. If you notice a clog, use a plunger or drain snake to remove it.

After flushing the system and removing any clogs, it’s time to clean the plumbing. You can use a commercial drain cleaner or a homemade solution of baking soda and vinegar. Pour the solution down the drain and let it sit for 30 minutes before rinsing with hot water. This will help remove any bacteria or buildup in the pipes.

Don’t forget to also clean your toilet. Pour a toilet bowl cleaner into the bowl and let it sit for at least 10 minutes before scrubbing with a brush. This will help remove any stains or buildup in the toilet bowl.

Finally, turn the water supply back on and run the water for a few minutes to ensure the system is running smoothly. By following these steps, you can keep your plumbing system in good condition and prevent any potential issues from arising.

Step 4: Refill Your Arctic Spa

Now that your spa is clean and dry, it’s time to refill it with fresh water. Start by turning off the garden hose or water supply before removing the filter caps and putting the filters back in their housings.

Next, begin filling your spa with fresh water. Make sure to use a hose filter to remove any impurities from the water before it enters the spa. Fill the spa until the water level is just above the highest jet.

After filling the spa, turn on the power and allow the water to circulate for at least 30 minutes before adding any chemicals. This will help ensure the water is properly balanced before adding any chemicals. Once the water is circulating, you can add the necessary chemicals according to the manufacturer’s instructions.

Turn Off the Power

Before beginning any maintenance on your Arctic Spa, it’s important to turn off the power. This will ensure your safety and prevent any electrical mishaps. To turn off the power, locate the control panel and flip the breaker switch to the off position. If you’re unsure which switch controls the power to your spa, consult the owner’s manual or contact a professional.

Once the power is off, drain the water from the spa. Begin by removing the drain plug and allowing the water to flow out. If your spa has a pump, turn it on to help speed up the draining process. Be sure to also remove any debris or dirt from the spa’s surface and drain area.

After the water has been drained, use a wet/dry vacuum to remove any remaining water from the spa. Be sure to vacuum around the jets, skimmer, and other areas where water may accumulate. Once the spa is completely dry, you can begin cleaning and performing any necessary maintenance.

Fill Your Spa with Water

Before you can enjoy a relaxing soak in your spa, you need to fill it with water. One of the most important steps in this process is to ensure that the water you’re using is clean and free of any contaminants. To do this, start by filling your spa with a hose and add a chemical sanitizer to the water to keep it clean. Make sure to test the pH level of the water to ensure that it’s within the recommended range of 7.2 to 7.If it’s too high or too low, you’ll need to adjust it using a pH increaser or decreaser.

When filling your spa, it’s important to not overfill it. This can lead to water overflowing and causing damage to your property. To avoid this, follow the manufacturer’s guidelines for the appropriate water level. If your spa doesn’t have a water level indicator, fill it until the water reaches the recommended level, usually indicated by a marker on the inside of the spa.

Another important consideration when filling your spa is the type of water you use. If you have hard water, which contains high levels of calcium and magnesium, you may need to add a water softener to prevent damage to the spa’s components. You can also use filtered water to prevent any impurities from affecting the quality of the water in your spa.

After filling your spa with water, turn on the filtration system to start circulating the water and filtering out any debris or contaminants. Depending on the size of your spa and the type of filtration system you have, this can take anywhere from a few hours to a full day. Once the water has been filtered, you can start enjoying your spa and all its benefits!

Step 5: Restart Your Arctic Spa

After completing the maintenance tasks and making the necessary repairs, you’re ready to restart your Arctic Spa. Follow these simple steps to get your spa up and running again:

Turn on the power: Make sure your spa is plugged in and the circuit breaker is turned on. This will provide power to the spa.

Reset the GFCI: If your spa has a Ground Fault Circuit Interrupter (GFCI), make sure to reset it. This will protect you from electrical shock in case of a short circuit.

Turn on the jets: Turn on the jets to get the water circulating in the spa. This will help to distribute any chemicals you’ve added to the water and ensure that the water is clean and fresh.

Check the water level: Make sure that the water level in your spa is at the appropriate level. If it’s too low, add more water using a hose until it reaches the recommended level.

Test the water: Finally, test the water using a test kit to make sure that the chemical levels are within the recommended range. Adjust the chemicals as necessary to achieve the proper balance.

Once you’ve completed these steps, you can sit back, relax, and enjoy your Arctic Spa. Regular maintenance and upkeep will ensure that your spa stays in top condition and provides you with years of enjoyment.

Reconnect the Power

Now that you’ve finished cleaning and replacing the necessary parts in your spa, it’s time to reconnect the power. Follow these steps:

Plug it in: Make sure your spa is properly plugged in and the circuit breaker is turned on.

Check for damage: Inspect the power cord for any damage or wear and tear. If you notice any issues, replace the cord immediately.

Flip the switch: Turn on the power switch for the spa. You should hear the pump turn on, which is a good sign that everything is working properly.

It’s important to take safety precautions when reconnecting the power to your spa. Remember to wear protective gear and be cautious when working with electricity.

With the power reconnected, your spa should be up and running smoothly again. Be sure to keep up with regular maintenance to ensure that your spa stays in great condition for years to come.

Check and Adjust Chemical Levels

After you’ve restarted your spa, it’s important to check and adjust the chemical levels to ensure that your spa water is clean and safe to use. Follow these steps:

Test the water: Use a test strip to check the pH and chlorine levels in the water. These levels should be within a certain range to ensure that the water is safe to use.

Add chemicals: If the pH or chlorine levels are too low, you’ll need to add the appropriate chemicals to bring them back to the correct levels. Be sure to follow the instructions carefully when adding chemicals to your spa water.

Wait and retest: After adding chemicals to your spa water, wait a few hours and then retest the water to ensure that the levels are within the correct range. If necessary, repeat the process until the water is safe to use.

It’s important to maintain proper chemical levels in your spa to prevent the growth of bacteria and algae. Check the chemical levels regularly to ensure that your spa water stays clean and safe for you and your family to use.

Test the Water Temperature

Before jumping into the water, it’s essential to test the temperature first. Many factors can affect water temperature, including the weather, the time of day, and the depth of the water. To ensure your safety and comfort, take a moment to test the water temperature. Use a water thermometer to get an accurate reading. These thermometers are widely available, and they are easy to use. Hold the thermometer under the water for a few seconds, then read the temperature.

The ideal temperature for swimming depends on personal preference. However, in general, most people prefer water that is between 78 to 82 degrees Fahrenheit. If the water temperature is below 70 degrees Fahrenheit, it’s considered too cold for swimming. When the water is too cold, it can cause hypothermia, which is a dangerous condition that occurs when the body loses heat faster than it can produce it. On the other hand, if the water is too warm, it can be uncomfortable and cause overheating.

Remember that water temperature can vary throughout the day. For example, if you’re swimming in a natural body of water, the temperature may be cooler in the morning and warmer in the afternoon. Additionally, if the weather is hot, the water may feel cooler than it actually is. Always test the water temperature before swimming, even if you’ve swum in the same spot before. Water temperature can change quickly, and you don’t want to risk your safety.

Additional Tips for Maintaining Your Arctic Spa

Regular maintenance is key to keeping your Arctic Spa in top condition for years to come. In addition to the routine cleaning and water care, there are a few extra tips to help prolong the life of your spa. One important tip is to protect your spa from the elements. While your Arctic Spa is built to withstand harsh conditions, it’s always a good idea to cover it when not in use. This will help prevent debris and weather from damaging your spa over time.

Another important tip is to check your spa’s filters regularly. Clogged filters can cause problems with water circulation, which can lead to issues with water quality and even damage to your spa’s equipment. Be sure to clean or replace your filters as recommended by the manufacturer to keep your spa running smoothly.

Finally, it’s important to monitor your spa’s water chemistry on a regular basis. Balancing the pH, alkalinity, and sanitizer levels can be a bit tricky, but it’s essential for keeping your water clean and clear. You can use test strips or a digital tester to check your water chemistry, and adjust the levels as needed. By following these additional tips for maintaining your Arctic Spa, you can ensure that it stays in great condition for years of enjoyment.

Change Your Spa’s Water Regularly

While it’s important to maintain your Arctic Spa’s water chemistry, eventually you’ll need to change the water completely. The frequency of water changes will depend on a number of factors, such as how often you use your spa and how well you maintain the water chemistry. However, as a general rule, you should plan on changing your spa’s water every 3-4 months.

One benefit of regular water changes is that it helps to prevent buildup of minerals and other contaminants in the water. Over time, even with proper maintenance, these contaminants can accumulate and lead to issues with water quality and even damage to your spa’s equipment.

When changing your spa’s water, be sure to drain it completely and clean the spa’s surfaces thoroughly. You can use a mild detergent and a soft brush to clean the spa’s surfaces, being careful not to scratch the acrylic. Once you’ve refilled the spa with fresh water, be sure to balance the water chemistry as needed.

Finally, it’s a good idea to clean your spa’s filters after you change the water. This will help ensure that the filters are in top condition for the new water. By following these tips and changing your spa’s water regularly, you can help keep your Arctic Spa in great condition for years to come.

Frequently Asked Questions