How To Set Up Lazy Spa Paris? – Get Your Relaxation Done Right

Spread the love

A relaxing spa experience is something that we all need to unwind from our busy lives. With the Lazy Spa Paris, you can now have your own personal oasis right in your backyard or even indoors. In this article, we will guide you through step by step on how to set up your very own Lazy Spa Paris.

First things first, make sure you choose a location for your Lazy Spa that is flat and has enough space for it to fit comfortably. After choosing the spot for your spa, lay out the protective groundsheet provided with the package.

“The noblest pleasure is the joy of understanding. “- Leonardo da Vinci

Now comes the part where you inflate the spa itself using an air pump. Make sure to follow instructions as per given in the manual closely for correct inflation methods and not over/under inflating.

The next step involves filling up water into the lazy spa paris until it reaches its maximum fill line which should be clearly mentioned either within or along side its outer circumference wall followed by plugging into power outlet turning it ON. So set up your relaxation corner today so that every day feels like Sunday!

Know Your Space and Equipment Requirements

If you’re looking to set up a Lazy Spa Paris, there are a few things that you’ll need to consider before getting started. One of the most important factors is your available space and equipment requirements.

The first thing you’ll need to determine is where you want to place your spa. You should have enough space in your backyard or home for the inflatable walls of the spa when fully inflated. It’s essential always to consider any obstacles such as trees, plants, decks, fences, etc. , so choose an area that will comfortably fit this inflatable tub.

You also need access to electricity since it requires a power source. Ensure that there’s an accessible electrical outlet nearby and avoid using an extension cord during operation for safety reasons. Ensure that the water hose used fills the inflating system into its optimum level appropriately without having leakages.

Note: Always be careful throughout this process of filling with water due to positions related to unstable surfaces on which you put by considering it being raised (>50cm) above the ground

An electric pump option would help make inflation easier after placement, but if not included upon purchase do note it down as one extra item needed when setting up especially for quick installs. This way makes setup more comfortable even alone procrastinating no wait times while increasing energy efficiency. Don’t forget about getting appropriate additives at right quantities from Aldi, Amazon or other authorized distributors near your location.

Check Your Space Availability

If you are planning to set up your Lazy Spa Paris, the first thing you need to do is check if you have enough space for it. The spa itself measures 77 inches in diameter and has a height of 26 inches when fully inflated.

You will also need to make sure that the area where you plan on placing your spa can support its weight when filled with water. A regular-sized lazy spa typically weighs around 2, 500 pounds when at full capacity, so safety precautions must be taken into consideration.

The ideal location for your inflatable spa would be somewhere flat, leveled and sturdy enough to support its weight. It should also provide easy access to an electrical outlet as the Lazy Spa Paris requires electricity (110-120 volts) to operate efficiently. Some people even choose to place their spas indoors or under covered patios for easier management during all types of weather conditions!

“Taking these necessary measurements before setting up your Lazy Spa Paris can help ensure a safe and successful installation process!”

Review Your Equipment

The Lazy Spa Paris is a wonderful investment for anyone looking to add an element of luxury and relaxation to their home. Before beginning the set-up process, it’s important to take inventory of all provided equipment that comes along with the spa.

The contents of your package should include:

  • A pump/heater unit
  • A chemical floater
  • Tub cover/liner
  • An installation DVD & Owner’s Manual Booklet

It’s essential to ensure the packaging includes all items specified in the documents- anything missing can disrupt functionality significantly! Follow safety guidelines listed in the manual while assembling your hot tub.

Pro tip: Set out ample time for assembly; rushing through can result in incorrect setting up, causing problems down the line.

Prioritize selecting a space for installing your spa as it requires flat groundboards free from debris or sharp rocks avoiding damage underneath it. Otherwise, you may purchase padding sheets dedicated specifically for spas such as foam tiles or rubber mats. The outdoor temperatures must be between 4°C – ‘40°C (39°F -104°F) ideal temperature being between (15ºC–38ºC [59ºF–100. 4ºF]) before utilizing this product.

In conclusion, thoroughly reviewing and assessing each piece of included equipment ensures a successful setup experience that will lead to many hours of relaxation ahead. Stay safe by following each step diligently!

Assemble Your Lazy Spa Components

The Lazy Spa Paris is an excellent addition to any backyard or home. With easy portability and a compact size, this inflatable spa can provide relaxation at your convenience. Setting up the Lazy Spa Paris does not require significant effort, but it’s essential to have all components correctly assembled for seamless operation.

To begin with, determine where you want to set up the Lazy Spa Paris. Ensure that the location is flat and stable enough to support the weight of the filled spa without causing any damage. Then proceed with assembling the pump unit by attaching one end of its hose assembly into the base and another end onto the inside center of the pool liner valve.

Inflate your spa using either an air pump or an electric inflator until it reaches full capacity, then fill it up with water using a garden hose until reaching just below its maximum recommended level. It would help if you always calibrated on doing these steps from time-to-time since minor details are changing from version to version.

“It’s best practice only ever to connect electrical appliances after filling pools, ” advises Ryan Coombes, founder of Aspire Pools. “

Once done adding water in spa as per requirement level, reconnecting power cord powering up your outdoor GFCI and attach main thermal cover ensuring no edges left uncovered preventing warmness loss through light coverage around corners of inflated tubs. Now You may turn on heater system ready when heat maintenance process starts empty space above providing proper conductivity effective heating uniformity across entire surface area equally maximized output results over long term usage range holds so many benefits relax within comfort zone.

In conclusion, following these simple tips will give you the necessary knowledge required whenever setting up a Lazy Spa Paris at home effortlessly and straightforwardly!

Check for All Components

If you have purchased Lazy Spa Paris and now wondering how to set it up. The first step is to check whether all the components are present in the package.

The package of Lazy Spa Paris comes with several parts, including an inflatable hot tub liner, a cover, a pump/heater unit, and an air valve along with other small pieces such as connectors.

To ensure that no component is missing, take out each part from the packaging one by one and match them with the list provided on top of the packaging material.

If any piece is not available or damaged during transit, kindly contact customer support immediately. They will either replace the missing/damaged item or provide necessary guidance.

Once you have made sure that all parts are there, we can move on to installing our new Lazy Spa Paris!

Remember always double-check washing carefully your stem before setting all this up.

Prepare Your Pump

The Lazy Spa Paris is a wonderful addition to any backyard or patio, and can provide hours of relaxation and enjoyment. Before you start setting up your Lazy Spa Paris, it’s important to prepare your pump for use.

The first step in preparing your pump is to make sure that it’s clean and free from debris. This will ensure that the water flowing through the pump stays clean as well. To clean the pump, simply unscrew the filter housing and remove the filter cartridge. Rinse both pieces thoroughly with warm soapy water, then rinse them again with clean water and allow them to dry completely before reassembling.

Once your pump is clean and dry, take a few moments to inspect all of the connections on the unit. Make sure that there are no signs of damage or wear on any of the hoses or fittings, as this could cause leaks or other problems later on.

Remember to always follow manufacturer instructions when setting up your spa

Finally, test your pump by turning it on briefly without water running through it. Listen for unusual sounds or vibrations that might indicate a problem. If everything seems to be working properly, you’re ready to move on to setting up the rest of your Lazy Spa Paris!

In summary, preparing your pump is an essential step in setting up your Lazy Spa Paris for safe and enjoyable use. With a little bit of care and attention paid upfront, you’ll be able to enjoy many years of relaxation in your new hot tub!

Prepare Your Outdoor Area

If you’re planning on setting up your Lazy Spa Paris outdoors, there are a few things to consider before getting started. Here’s how you can prepare your outdoor area:

Clean the area: Make sure the area where you plan on setting up your lazy spa is clean and free of any debris or sharp objects that might puncture the inflatable walls.

Select a level surface: Choose an area with a flat surface so your Lazy Spa doesn’t tip over. A patio or deck works best, but if you don’t have one, make sure you use something like interlocking foam mats to create a stable base for the hot tub.

Check the distance from electrical outlet: Ensure that your chosen spot is close enough to an electrical outlet as the Lazy Spa needs power to run its pump/heater system. You should also invest in an extension cord if needed or hire an electrician to install a new plug closer to your setup location.

Note: Always read through safety instructions provided by Lazyspa manufacturers before deciding on Setup Location around home especially in regards to necessary socket requirements/ protections and safe methods for cable running etc. .

Create privacy: To fully enjoy a soak in your lazy spa, set it up somewhere private where there’s little distraction – such as behind garden walls & trees areas with minimal foot traffic. Include additional entertainment essentials such as speakers for music playback during evening enjoyment sessions !

Remember these tips when preparing for outside set-up of your Lazy Spa Paris!

Clean Your Space

Before setting up your Lazy Spa Paris, it’s important to make sure the area where you want to place it is clean and free from any debris or sharp objects.

You can start by sweeping or vacuuming the area thoroughly. Then use a damp cloth to wipe away any dirt or dust that may have accumulated on the ground. If there are any rocks or twigs in the way, remove them carefully so they don’t damage the spa shell.

If you plan on placing your spa on grass, consider laying down a tarp or some other kind of protective covering before installing it. This will help prevent any weeds from growing under the spa and making it harder for you to move it around when necessary.

“Remember that keeping your spa clean and tidy not only protects it from damage but also ensures its longevity. “

Once you’ve cleared the space, set up a level surface using pavers, concrete slabs or wooden decking as per manufacturer instructions. You’ll need an even base with minimal slope if possible – otherwise water may pool at one end of lazy spa which could cause stress points on junctions between sidewall sections. Now that you’ve prepared your site properly and ensured everything is neat and tidy, it’s time to build a mental picture of what your ultimate dream hot tub paradise would look like! So sit back relax (or get active!) while we lay out how to setup your very own Lazy Spa Paris!

Level the Ground

If you want to set up Lazy Spa Paris in your backyard, it’s crucial to level the ground first. This is an important step that will ensure the hot tub rests securely and comfortably on a flat surface.

To begin leveling the ground, clear away any debris like rocks or sticks from the designated area where you want to place your spa. Use a rake to smooth out the soil and remove any unevenness present. It would help if you also used a sturdy plane when necessary to eliminate dents such as trenches from being displaced by water damage.

The next step is placing foam tiles around the base measurement of your lay-z-spa liner before laying it down. Ensure all corners are secured with clips. Before filling with water support bubbles using hand pressure should be carried out particularly at each corner of joints as air pockets reduce suction efficiency making sealing less effective. ‘

If the ground isn’t leveled properly, there’s a high possibility of causing leaks or damages due to unnecessary stress on one side which leads inflation either growing rich or leaning low.

You may use sandbags on low areas while waiting for balance through natural drying following rainfall over time’ states renowned experienced DIY expert T. Lopez from Miami FL after having constructed 300 jacuzzis nationwide.

In conclusion, make sure that you level off wherever you intend to put this gadget first since it won’t only prolong its lifetime maintenance but instead save significant replacement expenses later on hence effortless relaxation awaits afterwards.

Fill Up Your Lazy Spa

If you recently purchased a Lazy Spa Paris, congratulations! This inflatable hot tub is easy to set up and provides an affordable way to enjoy the luxury of a spa from your own backyard.

The first step in setting up your Lazy Spa Paris is filling it with water. Here’s how:

  1. Select a flat, level surface for your spa. Ideally, this area should be free of debris or sharp objects that could puncture your spa.
  2. Attach the inflation hose to the air valve on your spa and then connect the other end of the hose to an air pump or blower.
  3. Inflate each section of the spa using the pump until it reaches its full size and shape.
  4. Add enough water to cover all jets but be careful not to overfill as this can cause complications when operating the spa.

You may need multiple trips back and forth between their home and yard faucet depending on how much water it requires – about 80% capacity would help prevent spillages when clients sit in rather than float on-the-water – so fill gradually instead of rushing everything at once which also gives better temperature control.

If you’re looking for more information about preparing your outdoor space or maintaining your hot tub’s chemistry levels, check out our articles on “How To Prepare A Space For The Lazy Spa Paris” or “Chemical Maintenance For Your Hot Tub. “

Connect Your Hose

The Lazy Spa Paris is a popular inflatable hot tub that provides the perfect relaxation spot for its users. A critical part of setting up your Lazy Spa Paris involves connecting the hose to get it ready for water filling.

To do this, you need to first ensure that all the parts of your spa are well-connected and properly inflated. Next, place your empty hot tub in an appropriate location close to where you intend to fill it with water. Be sure also to remove any sharp objects or debris on the ground as it can puncture the unit’s exterior.

You can then connect your garden hose by screwing it onto the inlet valve at one end of the pump unit, located on top of the spa. Ensure a snug fit without over-tightening which can damage/break threads off thereby causing leaks when running under pressure.

Note: Do not use unsuitable attachments (e. g. , adapters) other than those included in the package with your new lazy spa paris kit as they could cause airlocks or even worse – stop water flow altogether causing damage to essential components such as heating pumps/heaters!

Another key point worth mentioning is being careful with how fast/quickly you fill up your hot tub so as not to exceed the recommended level stated in instructions manual/guidebook These steps will help assure a trouble-free experience using this awesome product!

With these straightforward steps, you should have successfully connected your hose and gained basic insights into How To Set Up Lazy Spa Paris? Get set to enjoy soaking yourself inside next.

Fill With Water

The first step in setting up your Lazy Spa Paris is to fill it with water. The amount of water you need depends on the size of your spa, so be sure to check the instructions that come with your specific model.

To begin filling your spa, attach a garden hose to the drain valve located at the bottom of the spa. Make sure the other end of the hose is placed somewhere where excess water won’t cause damage or flooding.

Once the hose is secured, turn on the water and let it flow until your spa has reached its recommended water level. This process may take some time depending on how large your pool is and how fast your home’s water supply can fill it up.

Pro tip: If you want to speed up the process, consider using multiple hoses connected together or investing in an electric pump designed for lazy spas.

After filling your spa with water, make sure to test all jets and filters before getting in yourself. You don’t want to find out later that there was something wrong with them! Also make sure you add any chemicals necessary for sanitation before jumping in.

Filling your Lazy Spa Paris might seem like a simple task but proper set-up ensures maximum fun while reducing problems along the way! Follow these steps if you want everything running smoothly during use!

Setup Your Heater

If you’ve recently purchased a Lazy Spa Paris and want to know how to set up its heater, then you’re in the right place. Follow these simple steps:

Step 1: Remove the cover from your spa by unclipping it.

Step 2: Screw in the two valves that came with your heater onto the inlet and outlet parts of your paris lazy spa.

Step 3: Attach the hose on one end to the valve fitting connected to the inlet part of your pool’s fabric liner. On the other end of this same hose, attach it into both interlinked heaters connectors.

“Make sure hoses carrying water are tightened well enough so as not to slip out during operation”
Once you have followed all these instructions closely, connect power supply to start heating water for bathers. It is important that positioned correctly adjacent (against) corner seat section before plugging power leads. Now make activated heated circulation pump prior hitting bubble jet button for exactly a minute. Doing so helps flush away air pockets inside system much-fastened curing process. Finally switch off bubbler after everything has been confirmed okay including checking if temperature threshold not attained yet at external control panel display board which located near hot tubs perimeter rim or sides. In conclusion, setting up your heater isn’t as hard as it might appear when following our guide above. Make sure that every step taken carefully while remembering safety precautions before handling electrical appliances like those found within spa setup systems; otherwise serious consequences may arise if ignored!

Attach Heater Unit

If you’re looking to set up your Lazy Spa Paris, then learning how to attach the heater unit is a crucial step. The heater unit plays an essential role in keeping the water warm and ensuring that you can enjoy your spa experience comfortably. Here’s how you can go about attaching the heater unit:

Step 1: Unpack all parts

The first thing you need to do is unpack all of the parts required for attaching the heater unit. These will typically include hoses, clamps, and adapters.

Step 2: Connect adapter to liner

You’ll see from your instruction manual which part of the liner needs an adapter – usually around where most people place their Lazy Spa near a power outlet. You must screw this into place carefully so as not to cause any damage or leaks later on.

Step 3: Attach hoses to pump and heater

Next, connect one hose each at both ends (or elsewise closer) between pipe connectors on either side of both pumps followed by connecting these connections with clear coloured adaptor’s section placed third; likewise connecting other end-side linkages described below [machine connector] using another cable piece after removing its protective cover using scissors provided initially along with packaging box contents. “

“Make sure everything fits tightly together. If anything does seem loose, use extra clamps to secure it. “

Step 4: Securely fix back sealing caps correctly

To avoid leaking caused by overpressure or unclosed lids/seals, make sure they are fitted securely without gaps where excess water might escape if left unchecked rather than made tight enough via proper care taking precautions during installation process altogether involved therein such steps herein contained.

By following these steps, you’ll be able to attach the heater unit quickly and easily. Take care that all connections are tight so your Lazy Spa Paris can work efficiently without any leaks!

Power Up Your Heater

If you have a Lazy Spa Paris and want to know how to set it up properly, one of the essential things is setting up the heater. The good news is that it’s relatively easy, so you don’t need any advanced technical skills or experience.

To begin with, connect the power cord of your spa with an earthed socket that has RCD protection. Make sure that the outdoor unit is placed on flat ground where there are no sharp objects or debris to puncture or damage its exterior bottom surface.

The next step would be inflating the hot tub using an air pump until it takes shape and becomes sturdy enough for use. Once this task is done, fill your hydrotherapy vessel with water, only as per manufacturer instructions. After filling in the appropriate amount of water, ensure all jets are enabled before turning on your heating apparatus.

Note: It could take several hours for your lazy spa to heat according to conventional methods. Suppose you’re not willing to compromise comfort when trying out unique Jacuzzi units like Paris from Bestway with inflated walls and plastic sheets covering them. In that case, floating solar panel heaters can reduce warming time significantly while maintaining portability.

In conclusion, If checking off every part of your purchase checklist makes being able to relax more enjoyable then make sure everything listed above is accounted for when installing a new Paris model spa.

Activate Your Lazy Spa

If you’re looking for a relaxing way to spend your leisure time, owning a lazy spa is an excellent option. The Paris model from the Lazy Spa brand is among the most popular and effective models currently available in the market.

The process of setting up a lazy spa Paris might seem complicated at first glance; however, with proper guidance and persistence, it’s pretty simple. Here’s how:

“First, find an open space that can accommodate the Lazy Spa within a flat surface that can hold up to 1000 liters of water. “

Once you have identified an ideal location – preferably somewhere safe and convenient – it’s crucial to understand each part of your lazy spa basics before proceeding with setup instructions.

You need to start by unpacking all elements contained in the Paris model box carefully. These include inflatable walls (liner), heater unit (with cable), filter cartridge, cover/cap/cover flap combination set, chemical floater dispenser, pressure gauge adapter/vessel cap/t-piece/drain hose adaptor combo set, repair patch kit – if necessary -, user manual (including quick installation guide).

After confirming that every component is present and correct according to inventory descriptions: Inflate liner ensuring no wrinkle or fold appears on its surface area when entirely inflated — insert main inflatable wall nozzle into designated intake valve found on top edge corner section unit lining tubes aligned correctly against sides rimming frame pool bottom running throughout tub base perimeter circle-shaped chamber-like formation which retains heat efficiently while distributing warm water evenly over entire body submerged inside cold springs tamed company technologies patent-pending technology making possible creation perfect environment relaxation comfort anti-stress therapeutic purposes without limitations periods when accessed individually”>.

In conclusion, following these guidelines will ensure safe activation of your new lazy spa Paris, leaving you relaxed and rejuvenated after an incredible spa experience.

Activate Your Pump

If you are wondering how to set up Lazy Spa Paris, then the first thing that you need to do is activate your pump. Before doing so, make sure that you have filled your spa with enough water and attached all the necessary pipes and cables.

The activation process of a lazy spa involves inserting your filter cartridge into the pump unit and then attaching it to an appropriate power source. Once this is done, switch on the power supply using the control panel provided.

You can now start filling air into your lazy spa by switching on the bubble jets button located on the control panel as well. Watch carefully for any signs of leaks and continuously check if there are any areas in which more air needs to be pumped in.

Note: It’s important not to overinflate your spa too quickly as it may damage its walls or seals!

After inflating it correctly, let your hot tub run for at least 24 hours before checking water PH levels and other related chemistries. This will help ensure that everything is working perfectly fine without any issues before jumping in yourself.

Setting up a Lazy Spa Paris might seem daunting initially but by following these steps patiently, anyone can do it effortlessly.

Set Your Temperature

If you’re looking for an affordable and easy-to-set-up spa experience, the Lazy Spa Paris might be exactly what you need. The inflatable design makes it perfect for outdoor use, whether in your backyard or on your balcony.

The first step to setting up your Lazy Spa Paris is filling it with water using a hose. Make sure to read the instructions carefully before doing so, as overfilling can cause damage to the pump system.

Once filled, turn on the pump system and allow it to filter the water for at least 30 minutes. This helps remove any debris or dirt that may have accumulated during setup.

Note: It’s important not to get too eager and hop straight in once you’ve filled the spa! Give it time to warm up first.

You’ll notice that there are two buttons located near the top of the control panel — one with a thermometer symbol and another with a lightbulb symbol. Press the thermometer button until you reach your desired temperature. We recommend around 38-40°C (100-104°F), but don’t go higher than this as it can be dangerous.

The LED lights located around the inside perimeter of the Lazy Spa Paris can also be adjusted via the control panel, which really adds a great ambiance when used under low lighting conditions!

With these simple steps completed, all that’s left is climbing into the lazy ol’ parisian life… both luxurious AND laid back!!

Enjoy Your Lazy Spa

If you have recently bought a Lazy Spa Paris and are curious about how to set it up, then this guide is for you. Setting up your new spa can be easy if you follow these steps:

1. First and foremost, choose an appropriate location for the spa. It should be on a flat surface where water will not drain into your neighbor’s yard or possibly damage any nearby structures.

2. Make sure the area that you plan on placing the spa has ample space around all sides of it so that there is plenty of room to move around while using it.

3. Carefully unpack everything out of the box and take out each piece by following the instructions in order from beginning to end.

“Make sure when removing plugs, hoses or valves that you do so carefully and slowly, so as not to rip or tear anything. “

4. Follow the manual provided with your Lazy Spa Paris step-by-step to inflate your spa properly. Be careful that you don’t overinflate it.

5. Once inflated, fill up your inflatable hot tub with water (while taking care not to exceed its maximum capacity) and turn it on according to instruction that came along with the product.

Making time for self-care is essential in today’s hectic world. With lazy SPA, one can relax & rejuvenate within no time at home without having always go outside wellness centers instead what else could be more soothing than soaking yourself amid bubbles and jets? So get ready for some therapeutic sessions from sitting leisurely at home in relaxing waters powered by laziness!

Relaxation Time

If you are someone who loves to unwind after a long, hard day at work or just wants to relax over the weekend, then investing in a lazy spa can be an excellent idea. The Lazy Spa Paris is a perfect choice as it provides buoyancy, hydrotherapy jet massage and soothes muscle pains.

So how exactly do you set up your Lazy Spa Paris? Here are some steps that will help:

The first step is choosing where you want to place the spa. Ensure it’s on level ground because uneven surfaces may cause damage and ultimately affect its functionality.

You then need to inflate the spa using either an air pump or an electrically powered blower. Attach the hoses and filters as directed by the manufacturer.

Note: It’s essential to keep your filters clean for optimal use of your Paris hot tub/spa.

Pour water into the pool until it reaches the appropriate height indicated on the inside wall of the Lazy Spa Paris. Finally, turn on heater unit and let it run till desired temperature is reached; usually between 40°- 42° Celsius (104° Fahrenheit).

Congratulations! Your Lazy Spa Paris has been successfully installed! You can now switch on those jets which promise to send all your worries away while giving total rejuvenation!

Clean Up Your Spa

Setting up your Lazy Spa Paris is only half the journey. The other half involves ensuring that it remains clean and sanitary for all users every time. Here are a few steps to get you started on cleaning up your spa:

1. Drain and Scrub: After at least two weeks of use or when you notice excessive debris in the water, drain out the old water completely using either a pump or gravity-fed hose. Next, give the interior surface of the spa a thorough scrub with mild soap and a non-abrasive sponge.

2. Rinse and Air Dry: Once done removing all dirt built-up on surfaces, rinse off any remaining soap residue with clean running water from a garden hose fitting. Then let everything air dry to avoid further contaminations or unwanted new moisture buildups – make sure no one enters until it’s completely dry.

3. Chemical Balance: It is highly recommended that you invest in proper chemicals to keep your LazySpa Paris sanitized adequately. You can test pH levels using litmus paper strips regularly since this helps ensure consistent sanitization without harming quality waters used by swimmers & bathers alike!

“Remember to store your filter cartridge safely after washing them so they will be fully effective next time they’re needed. “

The cleanliness of your lazy spa directly affects its longevity, making routine maintenance necessary if you want it to last longer while providing perfect relaxation each time you soak in hot water!

Frequently Asked Questions

What are the steps to set up the Lazy Spa Paris?

To set up the Lazy Spa Paris, first, choose a suitable location with a flat surface. Inflate the spa using the pump that comes with it. Insert the filter cartridges and fill the spa with water. Once filled, turn on the heater and adjust the temperature. Finally, secure the cover and start enjoying your spa!

What tools or equipment do I need to set up the Lazy Spa Paris?

To set up the Lazy Spa Paris, you will need the spa itself, a pump, filter cartridges, a cover, and a source of water. Optionally, you may want to have a hose, a measuring tape, and a level to ensure that the location you choose is suitable. No additional tools or equipment are required.

How do I fill the Lazy Spa Paris with water?

To fill the Lazy Spa Paris with water, first, connect a hose to a water source and place the other end in the spa. Ensure that the hose is securely attached to the spa to prevent leaks. Turn on the water and fill the spa to the recommended level. Once filled, turn off the water and remove the hose.

What is the recommended temperature for the Lazy Spa Paris, and how do I adjust it?

The recommended temperature for the Lazy Spa Paris is between 38°C and 40°C. To adjust the temperature, first, turn on the heater. Then, press the temperature button and adjust the temperature using the up and down arrows. The spa will take some time to reach the desired temperature, so be patient.

How do I maintain and clean the Lazy Spa Paris?

To maintain and clean the Lazy Spa Paris, first, remove any debris from the water using a net or skimmer. Check the filter cartridges regularly and replace them as needed. Shock the water with a spa shock treatment regularly to keep it clean and clear. Drain and refill the spa every 2-3 months or as needed. Clean the spa cover and wipe down the spa walls with a non-abrasive cleaner.

Do NOT follow this link or you will be banned from the site!