How To Move An Above Ground Spa – The Ultimate Guide

Spread the love

Moving an above ground spa can be a daunting task, especially if you’ve never done it before. With the right tools and knowledge, however, the process can be manageable. This ultimate guide will provide you with a step-by-step process to move your above ground spa to a new location.

The guide includes everything from the essential tools you will need to how to drain the water from your spa. You’ll also find tips and tricks on how to transport and reinstall the spa in its new location. Moving an above ground spa requires some planning and effort, but with the help of this guide, you’ll be able to do it without breaking a sweat.

So, whether you’re moving to a new house or just want to change the location of your spa, this guide has got you covered. Follow the steps outlined in this guide and you’ll be able to move your spa safely and efficiently. So, let’s get started!

Read on to learn the essential steps you need to take to move your above ground spa without damaging it. You’ll find all the information you need in this comprehensive guide. Don’t miss out!

Step-By-Step Instructions For Moving An Above Ground Spa

Moving an above ground spa can be a daunting task, but with proper planning and preparation, the process can be stress-free. The following step-by-step guide will help you move your spa without any hassle.

Step 1: Gather Essential Tools

The first step is to gather all the necessary tools for the job. You will need a dolly, moving straps, screwdrivers, wrenches, and pliers. Make sure to have all the tools on hand before starting the moving process.

Step 2: Drain The Water

The next step is to drain the water from the spa. Connect a garden hose to the spa’s drainage spout and drain the water into a nearby drain or a pool. If the water is not clean, consider using a submersible pump to drain the water.

Step 3: Disconnect The Electrical And Plumbing Connections

Before moving the spa, you need to disconnect the electrical and plumbing connections. Turn off the circuit breaker and disconnect the power supply. Remove the access panel and disconnect the plumbing connections.

Step 4: Remove The Spa Cover And Accessories

The next step is to remove the spa cover and accessories. Fold the cover and store it in a safe place. Remove any accessories such as steps or railings and store them in a safe place as well.

Step 5: Move The Spa

Finally, it’s time to move the spa. Place the dolly under the spa and secure it with moving straps. Use the dolly to move the spa to its new location. Once you have moved the spa, reconnect the electrical and plumbing connections and fill it with water.

By following these simple steps, you can move your above ground spa without any hassle. However, it’s important to take your time and proceed with caution to avoid any damage to the spa or injury to yourself or others.

Step 1: Gather Your Equipment

  1. Get Your Tools Ready: To move an above ground spa, you will need a variety of tools. Gather a dolly or hand truck, straps, moving blankets, and a wrench or pliers to disconnect the plumbing and electrical connections.

  2. Protect Your Spa: Purchase a spa cover or tarp to protect your spa from damage during the move. If your spa cover is damaged or worn, it’s a good idea to replace it before the move.

  3. Recruit Helpers: Moving a spa requires more than one set of hands. Recruit a few strong and reliable friends to help with the move. Make sure they understand the plan and are prepared for the physical demands of the job.

With these essential tools and helpers at your disposal, you’ll be well on your way to a successful spa move.

Step 2: Drain the Spa

Now that you have all the necessary tools and equipment, it’s time to drain the water from the spa. Turn off the spa’s power source and unplug it. If your spa has a drain valve, you can connect a garden hose to it and drain the water directly into a nearby drain. Otherwise, you can use a submersible pump to remove the water. Make sure to wear gloves and eye protection to avoid any injury.

Once the water is drained, you’ll need to remove any remaining water from the plumbing lines. To do this, use a wet/dry vacuum and suction out any water from the jets and pipes. Be thorough in this step as leftover water can freeze and damage the plumbing lines.

Next, clean the inside of the spa with a mild cleaning solution and a soft brush. Rinse the spa thoroughly with water and make sure there is no remaining debris or cleaning solution inside. Make sure to dry the inside of the spa thoroughly before moving it to prevent any water damage during transportation.

Finally, remove the filter and clean it according to the manufacturer’s instructions. Make sure it’s completely dry before reinserting it back into the spa.

Essential Tools Needed For Moving An Above Ground Spa

Moving an above ground spa requires a few essential tools to make the process efficient and safe. Make sure you have the following items on hand:

Spa Dolly: A spa dolly is a specialized hand truck that can handle the weight and size of a spa. It has straps to secure the spa in place and wheels to make it easier to move.

Furniture Blankets: Furniture blankets or moving pads can be used to protect the spa from scratches and dings during the move. They can also be used to slide the spa on a flat surface.

Ratchet Straps: Ratchet straps are used to secure the spa to the dolly during transport. They help keep the spa from shifting or falling off the dolly while in motion.

Having these essential tools on hand will make moving your above ground spa easier and safer.

Furniture Dolly

One of the most important tools you’ll need is a furniture dolly. A furniture dolly is a small platform on four wheels, and it’s perfect for moving heavy items, like an above ground spa. It’s essential to choose a dolly with a weight capacity that can handle the weight of your spa. You’ll also need straps to secure the spa to the dolly.

When selecting a dolly, look for one with non-slip pads on the platform to prevent the spa from sliding around during transportation. You can rent a furniture dolly from a local hardware store, or you can purchase one online or in-store.

Make sure to inspect the dolly before using it to ensure that it’s in good condition. Check the wheels, axles, and platform for any damage that could cause the spa to shift or fall off the dolly during transportation.

Trailer Hitch

A trailer hitch is essential for moving an above ground spa. The hitch is attached to a vehicle, allowing you to transport the spa to your desired location. There are different types of trailer hitches, so make sure you choose one that is compatible with your vehicle and the weight of your spa.

You can purchase a trailer hitch at an auto parts store or online. Make sure to follow the manufacturer’s instructions when installing the hitch onto your vehicle.

Before transporting the spa, make sure the hitch is securely attached to your vehicle and the safety chains are properly connected. Double-check everything before hitting the road to avoid any accidents or damage to your spa.

Pre-Moving Preparations For An Above Ground Spa

Choose the Right Moving Day: The weather is an important consideration when moving your spa. Ideally, it is best to move it during warm and dry weather. Avoid moving during winter, rain or snow.

Plan the Route: Plan the route before the move. Measure the spa and ensure it can fit through the gate, doorways, and any other obstructions. Check for any overhead wires, low-hanging trees, or any other potential obstructions that may require you to detour.

Prepare the New Location: Clear the new location of any debris, level the ground, and ensure that there is an adequate power supply. Also, ensure that the location can support the weight of the spa.

Disconnect the Electrical and Plumbing Connections: Before the move, ensure that the electrical and plumbing connections are disconnected properly. You may need a professional to do this to avoid damage to the spa.

Clean the Spa: Drain and clean the spa before the move. This ensures that the spa is in good condition during the move, and it also prevents debris from entering the pump and heater.

Clean the Spa

Before you move your above ground spa, you need to make sure it is clean. Drain the water and use a spa cleaner to clean the interior surfaces of the spa. You can use a scrub brush to remove any tough stains or debris. After cleaning, rinse the spa thoroughly with a hose.

Make sure to also clean the spa cover, and if it is damaged, consider replacing it. A clean spa will not only look better, but it will also help prevent dirt and debris from getting inside the spa during transport.

Once the spa is clean, leave it to dry completely before moving it. This will help prevent any water damage or mold growth during the move.

Don’t forget to also clean the spa equipment, such as the filter and heater, before moving. This will help ensure they continue to function properly once the spa is reinstalled.

How To Drain Water From An Above Ground Spa?

Draining the water from an above ground spa is a necessary step in the moving process. Here are four steps to help you with this:

Turn Off Power: Before you start draining the water, make sure the power to the spa is turned off. This will ensure your safety and avoid any damage to the electrical components.

Connect a Garden Hose: Connect a garden hose to the drainage spout at the bottom of the spa. Make sure that the hose is long enough to reach the nearest drain or outlet.

Open the Drain Valve: Open the drain valve and let the water flow out of the spa through the hose. Keep an eye on the hose to ensure that it doesn’t come loose or get clogged.

Dry Out the Spa: Once all the water is drained out, use towels or a wet-dry vacuum to remove any remaining water from the spa. This will ensure that the spa is completely dry before you start moving it.

Method 1: Siphoning the Water

Step 1: Attach a garden hose to the spa’s drain valve and place the other end of the hose in an area lower than the spa.

Step 2: Turn off the power supply to the spa to prevent any mishaps.

Step 3: Once the hose is set up properly, start siphoning the water by creating a vacuum. You can use your mouth to suck out the air from the hose, or you can use a small pump to create the vacuum.

Step 4: Once the water starts to flow, monitor the process carefully to ensure that the water is flowing at a consistent rate.

Method 2: Using a Submersible Pump

Step 1: First, you will need to rent or purchase a submersible pump suitable for your spa size. Most spa owners can use a standard 1/2 or 1 horsepower pump, but larger spas may require a more powerful pump.

Step 2: Locate the drain valve on your spa and attach a garden hose to the valve. Then, run the hose to the area where you want to drain the water.

Step 3: Place the submersible pump inside the spa, making sure it is completely submerged in water. Connect the pump’s outlet hose to the garden hose attached to the drain valve.

Step 4: Turn on the submersible pump and let it run until all the water is drained from the spa. Be sure to keep an eye on the pump and turn it off once the water level has dropped to a safe level.

Method 3: Gravity Drainage

Step 1: Turn off the spa’s heater and pump

Before beginning the gravity drainage process, turn off the spa’s heater and pump to avoid damage.

Step 2: Attach a hose to the drainage spout

Locate the drainage spout on the spa and attach a garden hose to it securely.

Step 3: Position the hose to a drainage area

Choose a suitable area to drain the water, and ensure that the hose is long enough to reach it. Position the hose in a downhill direction to ensure proper drainage.

Step 4: Remove the drain cap and let the water flow

Remove the drain cap from the drainage spout and let the water flow out of the hose. Be patient as this method is the slowest among the three methods, and it may take a few hours to drain the entire spa.

Transporting An Above Ground Spa – Tips And Tricks

Transporting an above ground spa is not an easy task, but with some tips and tricks, it can be done without causing any damage to the spa.

Prepare the spa for transportation: Before moving the spa, make sure to drain all the water, clean it thoroughly, and disconnect all electrical and plumbing connections.

Use the right equipment: Rent or purchase the necessary equipment such as a furniture dolly, trailer hitch, and moving straps to help you move the spa safely.

Secure the spa: Once the spa is on the trailer, make sure it is properly secured with straps or chains to prevent it from shifting during transportation.

Choose the right route: Plan ahead and choose a route that has the least amount of turns, bumps, and steep hills to avoid any potential damage to the spa.

Seek professional help: If you are not confident in your ability to move the spa safely, seek professional help from a moving company that has experience in transporting above ground spas.

Tip 1: Secure the Spa in Transit

When transporting an above ground spa, it is important to secure it properly to prevent any damage during transit. Use strong ratchet straps to tie the spa down to the vehicle securely. Make sure the spa is level and secure on the vehicle bed to prevent any wobbling or tipping.

For extra safety, you can also use foam padding to protect the spa during transit. Cover the spa with a tarp or blanket to protect it from dust, debris, and weather elements.

It is important to also make sure that the spa is not overloaded with water. The water should be drained to the recommended level by the manufacturer, to prevent any damage during transit.

Tip 2: Balance the Weight Distribution

Balance is a key factor when it comes to towing. Properly balancing the weight distribution between the towing vehicle and the trailer will ensure a smooth and safe ride. Before you set off on your journey, make sure to properly load your trailer with the heavier items placed towards the center of the trailer. This will help ensure that the weight is distributed evenly and will prevent swaying or fishtailing.

When towing a trailer, the weight distribution can have a significant impact on the handling of the vehicle. An unbalanced load can cause problems such as uneven tire wear, reduced fuel efficiency, and even damage to your vehicle’s suspension. To avoid these issues, it’s essential to properly balance the weight distribution.

Another key factor to consider is the tongue weight of the trailer. The tongue weight is the amount of weight that the trailer’s tongue puts on the towing vehicle’s hitch. It’s important to make sure that the tongue weight is not too heavy or too light. If the tongue weight is too heavy, it can cause the front of the towing vehicle to lift, reducing the steering control. On the other hand, if the tongue weight is too light, the trailer can sway and cause a loss of control.

One way to ensure proper weight distribution and tongue weight is to use a distribution hitch. A distribution hitch is a device that distributes the weight of the trailer more evenly over the towing vehicle’s axles. This helps to improve stability and handling and can reduce the risk of accidents.

Finally, it’s important to check the weight capacity of your towing vehicle before you load your trailer. Exceeding the weight capacity of your vehicle can be dangerous and can cause damage to your vehicle’s engine, transmission, and brakes. Always make sure to check the manufacturer’s recommendations for weight limits and follow them carefully.

  • Balance your load with heavier items in the center of the trailer
  • Check and adjust tongue weight to ensure proper handling
  • Consider using a distribution hitch for better weight distribution

By following these tips, you can ensure that your trailer is properly loaded and balanced, which will help to prevent accidents and ensure a safe and smooth journey.

TipDescriptionBenefit
1Balance your loadPrevents swaying and fishtailing
2Check and adjust tongue weightImproves steering control and reduces sway
3Use a distribution hitchImproves weight distribution and stability

Re-Installation And Reconnecting An Above Ground Spa

When it comes to re-installing and reconnecting an above ground spa, there are a few important things to keep in mind. The first step is to drain the spa completely, which can be done by using a submersible pump. Once the spa is empty, it’s time to move onto the next step.

The next step is to disconnect the electrical and plumbing connections. This includes turning off the power to the spa at the circuit breaker and disconnecting the wires from the spa control panel. Additionally, any plumbing connections will need to be disconnected to ensure the spa can be safely moved.

Once the electrical and plumbing connections have been disconnected, it’s time to move the spa. Depending on the size and weight of the spa, this may require a few people or a specialized dolly. Make sure to take the necessary precautions when moving the spa to avoid damaging it or injuring yourself.

Step 1: Prepare the Site

Before you can begin re-installing your above ground spa, it’s important to properly prepare the site to ensure a smooth installation process. Here are a few important things to keep in mind:

  • Level: The site where the spa will be installed needs to be level. This will ensure that the spa is stable and prevents any damage to the spa’s shell or plumbing connections. Use a level to check that the site is even and adjust as necessary.
  • Support: The site also needs to be able to support the weight of the spa, as well as any additional weight from the water and people using it. Make sure that the site is strong enough to handle the weight before installing the spa.
  • Accessibility: The spa should be installed in an area that is easily accessible. This will make it easier to perform routine maintenance and repairs if necessary. Additionally, ensure that there is adequate space around the spa for any required maintenance work.

By properly preparing the site before installing your above ground spa, you can ensure that the installation process goes smoothly and that your spa is properly supported and accessible for future maintenance and repairs.

Step 2: Reconnect the Electrical and Plumbing Connections

Electrical ConnectionsPlumbing ConnectionsOther Connections
Power cord: Plug in the power cord and ensure that it’s secured in place.Water supply: Reconnect the water supply hoses and check for any leaks. Also, reconnect the drain hose.Gas line: If your dishwasher runs on gas, reconnect the gas line and check for any leaks.
Control panel: Reconnect the control panel to the dishwasher and ensure that all the buttons and switches are working properly.Garbage disposal: If your dishwasher is connected to a garbage disposal, reconnect the drain hose to the disposal.Ventilation system: If your dishwasher has a ventilation system, reconnect it and check for proper airflow.
Ground wire: Reconnect the ground wire to the dishwasher and ensure that it’s properly connected to the electrical box.Air gap: If your dishwasher has an air gap, reconnect the hoses and check for proper water flow.Other: Check for any other connections that were disconnected during the removal process and reconnect them.

Once you have reconnected all the necessary electrical and plumbing connections, turn on the water supply and test the dishwasher for any leaks or malfunctions. If everything is working properly, slide the dishwasher back into its original position and secure it in place. Plug in the power cord and turn on the dishwasher to make sure that it runs smoothly.

Remember to follow the manufacturer’s instructions carefully and refer to the owner’s manual for any specific details. Also, make sure to turn off the power supply and water supply before beginning any installation or removal process.

By following these simple steps, you can easily remove and reinstall a dishwasher on your own, without the need for professional help. However, if you encounter any difficulties or issues, it’s always best to seek help from a licensed technician.

Step 3: Refill and Test the Spa

Now that you have reconnected the electrical and plumbing connections, it’s time to refill the spa. Be sure to use a garden hose to fill the spa to the appropriate level. Do not use hot water, as it can damage the spa’s surface. You should also add the appropriate amount of spa chemicals to balance the water chemistry. Refer to your spa owner’s manual for instructions on chemical dosages.

Once you have refilled the spa and added the chemicals, turn on the power to the spa and let it run for at least 24 hours. During this time, the spa’s heating system will heat the water to the desired temperature. It’s important to check the temperature of the water during this time to ensure that it’s not too hot or too cold.

After 24 hours, it’s time to test the spa. Get into the water and make sure all the jets are working properly. Check the water temperature again and make any necessary adjustments. You should also check the water chemistry using a test strip. Make sure the pH, total alkalinity, and sanitizer levels are within the recommended range.

Maintenance Tips After Moving An Above Ground Spa

Once you have successfully moved your above ground spa to its new location, there are a few maintenance tips you should keep in mind to ensure it continues to function properly. Here are 5 tips to keep in mind:

Check the Electrical and Plumbing Connections: After moving your spa, it’s important to check the electrical and plumbing connections to ensure they’re secure. Loose connections can cause problems with your spa’s functionality, so make sure they’re tightened appropriately.

Clean the Spa Cover and Filter: Moving your spa can cause dust and debris to accumulate on the spa cover and filter. Take some time to clean both of these items before using the spa again. A dirty filter can affect the water quality, and a dirty cover can make the spa look unattractive.

Balance the Water Chemistry: Whenever you move your spa, it’s important to balance the water chemistry again. Use a water test kit to check the pH, total alkalinity, and sanitizer levels. Make any necessary adjustments to ensure the water chemistry is within the recommended range.

Inspect the Spa Cabinet: Take a look at the spa cabinet to make sure it’s in good condition. Look for any signs of damage or wear and tear. If you notice any issues, make repairs as necessary to prevent further damage.

Schedule Regular Maintenance: To keep your spa in good condition, it’s important to schedule regular maintenance. This includes cleaning the spa regularly, checking the water chemistry, and inspecting the spa for any issues. Regular maintenance can help prevent major problems from occurring and can extend the life of your spa.

Check for Leaks

One of the most important things you should do after moving an above ground spa is to check for leaks. Even small leaks can turn into big problems if not taken care of immediately. You can start by checking all the connections and seals for any visible signs of leaks. Be sure to check around the pump, heater, and filter.

If you notice any leaks, it’s important to take care of them as soon as possible. This can be as simple as tightening a connection or replacing a seal. If the leak is more severe, you may need to call a professional for help. Don’t wait too long to address a leak, as it can lead to costly damage.

One way to prevent leaks from happening in the first place is to ensure that your spa is level. A spa that is not level can put stress on the connections and cause leaks. So, before filling your spa, make sure it is sitting level on a solid foundation.

Another thing to keep in mind is that changes in temperature can cause materials to expand and contract, which can lead to leaks. To prevent this from happening, it’s a good idea to keep your spa covered when not in use, especially during extreme temperatures.

Frequently Asked Questions

What equipment do you need to move an above ground spa?

When it comes to moving an above ground spa, having the right equipment is crucial. Some of the equipment you may need include a spa dolly, straps, a trailer, and a crane. Each equipment plays an important role in ensuring the spa is safely transported to its new location.

How do you prepare an above ground spa for moving?

Before you move an above ground spa, it’s important to prepare it for the move. Some of the steps involved in preparing a spa for moving include draining the water, disconnecting electrical and plumbing connections, and removing any accessories. Preparing the spa properly ensures it is not damaged during transportation.

How do you safely lift an above ground spa?

Lifting an above ground spa safely is crucial to avoid accidents and damage to the spa. To lift the spa, you will need to use a crane or straps. It’s important to ensure the spa is properly balanced and secured before lifting it. Working with professionals is highly recommended to ensure the spa is lifted safely.

How do you transport an above ground spa?

Transporting an above ground spa involves carefully loading it onto a trailer and securing it with straps. The spa should be placed on its side during transportation to prevent damage to its structural components. It’s important to drive slowly and cautiously to avoid damaging the spa while in transit.

How do you reinstall an above ground spa?

After moving an above ground spa, it’s important to reinstall it correctly to ensure it functions properly. Some of the steps involved in reinstalling a spa include reconnecting the electrical and plumbing connections, refilling it with water, and testing it for leaks. Working with a professional is highly recommended to ensure the spa is properly reinstalled.

How often should an above ground spa be moved?

The frequency of moving an above ground spa depends on several factors such as the age of the spa, how often it is used, and the condition of the surrounding area. It’s recommended to move the spa every 5-7 years to prevent damage to the spa’s structure and ensure its longevity.

Do NOT follow this link or you will be banned from the site!