How to Install Fresh Spa Bidet: Step-by-Step Guide

Welcome to our step-by-step guide on how to install a Fresh Spa bidet. Bidets have become increasingly popular due to their hygienic and eco-friendly nature. They are easy to install, and with a little guidance, you can do it yourself without the help of a professional plumber.

The Fresh Spa bidet is a fantastic option for those looking for an affordable and easy-to-install bidet. The Fresh Spa bidet is equipped with features that make it stand out from the competition. With its adjustable water pressure and temperature settings, you can customize your experience to your liking. Additionally, the bidet is self-cleaning, eliminating the need for additional cleaning time.

Installing a Fresh Spa bidet is not as difficult as you might think. With our easy-to-follow guide, you will have your bidet up and running in no time. Whether you are a beginner or an experienced DIYer, our guide will provide you with everything you need to know to get the job done.

So, grab your tools and let’s get started on this exciting project that will change your life forever! By the end of this guide, you will be equipped with the knowledge and skills necessary to install your Fresh Spa bidet with ease.

Gather Necessary Tools

Before starting the installation process of your fresh spa bidet, you need to gather all the necessary tools. Here are the five essential tools you will need to complete the installation process:

Adjustable wrench – used to tighten and loosen the nuts and bolts

Phillips head screwdriver – used to secure the mounting plate and seat to the toilet bowl

Teflon tape – used to create a watertight seal between the mounting plate and the toilet bowl

Utility knife – used to cut the excess Teflon tape

Bidet seat kit – comes with all the hardware required for installation, including the mounting plate, seat, and hoses

Make sure you have all the tools mentioned above before starting the installation process. Having all the necessary tools will ensure a smooth and easy installation process.

Check What’s Included in the Package

1. Bidet Seat: The bidet seat is the primary component of the Fresh Spa Bidet. Make sure that the bidet seat is included in the package and is compatible with your toilet.

2. Mounting Plate: The mounting plate attaches the bidet seat to your toilet bowl. Ensure that the package includes a mounting plate that is compatible with your toilet.

3. T-valve: The T-valve connects the bidet to your water supply. Make sure that the package includes a T-valve.

4. Hose: The hose connects the T-valve to the bidet. Check that the package includes a hose of the appropriate length.

5. User Manual: The user manual provides step-by-step instructions for installing and using the Fresh Spa Bidet. Ensure that the package includes a user manual.

It is essential to check what’s included in the package before starting the installation process. By doing so, you can ensure that you have all the necessary tools to install the Fresh Spa Bidet.

Prepare Additional Tools

Aside from the tools included in the package, you may need additional items to make the installation process smoother. Here are some tools that may come in handy:

• Adjustable Wrench: Use this tool to tighten or loosen nuts and bolts.
• Teflon Tape: This tape can be wrapped around the threads of pipes to create a watertight seal.
• Screwdriver Set: You may need a screwdriver to remove the existing toilet seat and to tighten mounting bolts.
• Hacksaw: Use this tool to cut the mounting bolts to the correct length.
• Bucket: You will need a bucket to catch any water that may spill during the installation process.

It is always better to be prepared with the right tools before starting the installation process to avoid any delays or complications.

Shut Off Water Supply

Before installing the Fresh Spa Bidet, it’s important to shut off the water supply to the toilet. You can find the valve behind the toilet or on the wall. Turn the valve clockwise to close it.

Next, flush the toilet to remove any remaining water in the tank and bowl. This will prevent water from spilling out when you disconnect the water supply line.

After the water is turned off and the toilet is flushed, use a pair of pliers to disconnect the water supply line from the bottom of the tank. Use a bucket or towels to catch any remaining water that may spill out.

If the valve is old or difficult to turn, use a wrench or pliers to help you turn it. Be careful not to apply too much force as it could damage the valve or the pipe.

Locate the Water Shut-Off Valve

The first step in shutting off the water supply is to locate the shut-off valve. This valve is usually located behind the toilet, on the wall. It can be identified by its oval-shaped handle and the pipes leading to it.

Once you have located the shut-off valve, turn it clockwise until it is completely closed. This will stop the flow of water to the toilet and allow you to work on it without any risk of flooding.

If you cannot locate the shut-off valve for the toilet, you can shut off the water supply to the entire house instead. This can be done at the main water supply valve, usually located outside the house.

It is important to shut off the water supply before beginning any work on the toilet to avoid any water damage or accidents.

Turn Off the Water Supply

Once you have located the water shut-off valve, turn it clockwise to shut off the water supply to the toilet. This will ensure that you don’t accidentally flood your bathroom while installing the bidet.

If you are unable to locate the shut-off valve for the toilet, you can turn off the main water supply to the house instead.

After turning off the water supply, flush the toilet to drain any water left in the tank and bowl. This will prevent any water from spilling out while you’re working on the bidet.

Remember to keep the water supply turned off until the installation is complete and you have tested the bidet for leaks.

Remove Existing Toilet Seat

Before installing a bidet, you need to remove the existing toilet seat. Start by lifting the seat and lid, which will reveal the bolts on each side of the seat.

Use a wrench to remove the nuts from the bolts. You may need to hold the bolts in place with a flathead screwdriver while you turn the nuts counterclockwise with the wrench.

Once the nuts are removed, lift the toilet seat off the toilet and set it aside. You may need to use a bit of force if the seat has been in place for a long time.

Be sure to clean the area around the bolt holes with a disinfectant spray or wipe before moving on to the next step.

Unscrew the Bolts Holding the Seat

The bolts holding the seat are usually located at the back of the toilet bowl. You can use a screwdriver or pliers to unscrew the nuts that are securing the bolts in place.

Make sure to keep the nuts and bolts in a safe place as you will need them later to attach the new bidet seat.

If the bolts are rusted or stuck, you can use a lubricant like WD-40 to loosen them up.

Install Mounting Plate

Step 1: Place the mounting plate over the existing toilet bowl holes and align it properly.

Step 2: Insert the bolts and secure them with the nuts from underneath the toilet bowl.

Step 3: Tighten the bolts with a wrench, but be careful not to over-tighten them and crack the toilet bowl.

Step 4: Ensure that the mounting plate is level and secure by gently wiggling it.

Step 5: Use a screwdriver to tighten any loose screws or bolts and check for stability.

Position the Mounting Plate

Check the toilet bowl and identify the hinge bolt holes where the new seat will be installed. Make sure to clean and dry the area.

Place the mounting plate over the hinge bolt holes and align it properly. Ensure that the plate is level and centered on the bowl.

Using a pencil or marker, mark the position of the mounting plate on the bowl. This will help you position the plate properly when you’re ready to attach it.

Double-check the alignment and make any necessary adjustments before proceeding.

Once you’re satisfied with the position of the mounting plate, use a screwdriver to attach it to the bowl using the bolts provided.

Secure the Mounting Plate with Screws

Using a screwdriver, insert the provided screws into the holes on the mounting plate, ensuring they are flush against the plate. Tighten the screws with the screwdriver, but be careful not to overtighten them as this can cause damage to the porcelain.

After tightening the screws, test the stability of the mounting plate by giving it a gentle tug. If it feels secure, move on to the next step. If it feels loose, you may need to adjust the screws or reposition the mounting plate.

Some mounting plates may come with brackets or clips to provide additional support. If your mounting plate has these components, follow the manufacturer’s instructions to attach them securely.

Attach Fresh Spa Bidet

Step 1: Connect the T-Valve to the Water Supply

Start by turning off the water supply to the toilet. Next, remove the flexible hose that connects the water supply to the toilet tank. Attach the T-valve to the water supply and connect the flexible hose to the T-valve. Tighten the connections with pliers if necessary.

Step 2: Attach the Bidet Hose to the T-Valve

Attach one end of the bidet hose to the T-valve and the other end to the bidet. Make sure the connections are tight and secure.

Step 3: Attach the Bidet to the Mounting Plate

Slide the bidet onto the mounting plate until it clicks into place. Make sure it is securely attached and does not wobble.

Step 4: Connect the Power Cord

Plug in the power cord for the bidet. Make sure it is connected to a GFCI outlet for safety.

Step 5: Test the Bidet

Turn the water supply back on and test the bidet to make sure it is functioning properly. Adjust the water pressure and temperature settings as desired.

Align the Bidet with the Mounting Plate

• Step 1: Lift the bidet and place it over the mounting plate, aligning the bolt holes with the screws on the plate.

• Step 2: Ensure that the bidet is level and centered properly over the toilet bowl.

• Step 3: Gently lower the bidet onto the mounting plate, making sure the bolts fit snugly into the holes.

• Step 4: Tighten the bolts by hand until they are snug, and then use a wrench to secure them tightly.

• Step 5: Attach the water supply hose to the inlet on the bottom of the bidet.

Once you have successfully aligned the bidet with the mounting plate and securely fastened it, you can move on to connecting the water supply and testing the bidet to ensure it is functioning properly.

Reconnect Water Supply and Test

Reconnect the water supply hose to the bidet fitting and hand-tighten it securely. Use a wrench to make sure it is properly tightened.

Once the water supply is reconnected, turn on the water valve slowly to avoid sudden pressure surges. Check for leaks around the connections and tighten if necessary.

To test the bidet, turn on the water supply and press the “clean” button. Check if the water flow is smooth and without any leaks. Adjust the water pressure and temperature to your liking and enjoy your fresh spa bidet.

Turn on the Water Supply

Once the bidet is attached, it’s time to turn the water supply back on.

Before turning the water supply on, double-check all connections to make sure they are tight and secure.

Slowly turn the water supply valve back on and check for any leaks. If there are no leaks, proceed to the next step.

Test the Fresh Spa Bidet

Once you have connected the water supply and turned it on, it’s time to test the Fresh Spa Bidet.

To start, sit on the toilet seat and activate the bidet using the control panel. Observe the water flow and adjust the pressure as needed.

Check the temperature of the water and make sure it’s comfortable. You can adjust the temperature using the control panel.

Finally, test the dryer function and adjust the temperature and pressure as needed.

If everything works as expected, you can now enjoy the benefits of your new Fresh Spa Bidet.

Frequently Asked Questions