How to Drain a Sundance Spa: A Step-by-Step Guide

Welcome to our step-by-step guide on how to drain a Sundance Spa! If you’re a spa owner, you know how important it is to maintain your spa to keep it functioning properly. At some point, you may need to drain your spa for various reasons, such as cleaning or repairs. But how exactly do you go about draining your Sundance Spa?

Don’t worry, we’ve got you covered. In this guide, we’ll take you through each step of the process to ensure that your spa is drained correctly and safely. From preparing your spa for draining to restarting it after you’ve refilled it, we’ll cover everything you need to know to drain your Sundance Spa like a pro.

Before we dive in, let’s take a moment to emphasize the importance of regular maintenance of your spa. Not only does regular maintenance prolong the life of your spa, but it also keeps it clean and safe for use. So, let’s get started and learn how to properly drain a Sundance Spa!

Are you ready to learn how to drain your Sundance Spa like a pro? Keep reading to discover our step-by-step guide!

Preparing Your Sundance Spa for Draining

Before draining your Sundance Spa, you need to ensure that it is properly prepared. Begin by turning off the power to your spa at the main circuit breaker. This will prevent any accidents and ensure that the draining process goes smoothly.

The next step is to gather all the necessary equipment, including a garden hose, a bucket, and a sponge. Also, ensure that the drainage area is clear of any debris, such as leaves or sticks, which can clog the hose.

Once you have everything you need, the first thing to do is to remove the filter. This is important because it will help prevent any debris from entering the pump during the draining process. Clean the filter thoroughly and store it in a safe place.

After removing the filter, it’s time to remove the drain cap from the bottom of the spa. Be careful when doing this because the water inside the spa will be hot and under pressure. Allow the water to cool down before proceeding.

Lastly, use a sponge to remove any remaining water from the spa. This is important because it will help prevent any damage to your spa during the draining process. Once you have removed all the water, you are ready to begin the draining process.

Step 1: Turn Off the Power to Your Spa

Before draining your Sundance spa, you must first turn off the power to the spa to avoid any accidents. Locate the spa’s electrical panel and turn off the circuit breaker or switch that controls the power to the spa. If you cannot find the electrical panel or are unsure which circuit breaker controls the power to your spa, consult the owner’s manual or a qualified electrician.

Once you have turned off the power to your Sundance spa, you can proceed with the draining process. It is important to follow the correct steps to avoid any damage to your spa and to ensure a safe and successful draining process.

Turning off the power to your Sundance spa also helps protect you from electrical shocks that can occur when water comes into contact with electrical components.

Step 2: Remove the Filter Cartridge

The next step in preparing your Sundance Spa for draining is to remove the filter cartridge. This will ensure that the draining process is as smooth as possible and that no water is left in the spa’s plumbing or filter. Here’s how to do it:

1. Turn off the power to your spa: Just like in step 1, it’s important to make sure that the power is off before proceeding with any maintenance.
2. Locate the filter compartment: Depending on your spa model, the filter compartment may be located in different areas. Check your owner’s manual for specific instructions.
3. Remove the filter cartridge: Once you’ve located the filter compartment, remove the filter cartridge by unscrewing the cap and lifting it out of the compartment.
4. Clean the filter: Take this opportunity to clean your filter cartridge. A dirty filter can cause your spa to work harder than it needs to, and can shorten the life of your spa’s equipment.

Removing the filter cartridge is an important step in the process of draining your Sundance Spa. By following these simple steps, you can ensure that your spa is ready for draining and that the process goes smoothly.

Step 3: Remove Any Debris from the Spa

The next step in preparing your Sundance spa for draining is to remove any debris from the water. This includes leaves, dirt, and other particles that may have accumulated in the spa.

Use a Skimmer: Start by using a skimmer net to remove any large debris from the surface of the water. This will make it easier to drain the spa and reduce the risk of clogging the drain.

Scrub the Walls: Next, use a spa brush to scrub the walls of the spa to remove any dirt or grime that may have built up. This will help to ensure that the water drains smoothly and that the spa is clean when it is refilled.

Check the Jets: Take a look at the jets in your spa and make sure they are clean and free of any debris. If they are clogged, use a small brush to clean them out before draining the water.

Empty the Skimmer Basket: Finally, be sure to empty the skimmer basket and any other debris traps in the spa. This will help to prevent any clogs or blockages during the draining process.

Draining Your Sundance Spa

Step 1: Attach a Hose to the Drain Valve

Attach a hose to the drain valve located at the bottom of your spa. Ensure that the hose is long enough to reach the area where you want to drain the water. Once you’ve connected the hose, make sure it is tightly secured to the drain valve to prevent any leaks.

Step 2: Open the Drain Valve

With the hose securely attached, open the drain valve by turning it counterclockwise. Be sure to position the hose in a way that the water flows away from your home or any other structures. If there is a lot of water in the spa, it may take some time to completely drain.

Step 3: Empty the Spa

Once the draining process has begun, you can turn on the air jets to help push any remaining water out of the spa. You can also use a wet vacuum to remove any remaining water from the spa. Make sure to remove as much water as possible to prevent damage to the spa’s components.

Step 1: Attach a Hose to the Drain Spigot

Before draining your Sundance spa, make sure to attach a hose to the drain spigot located near the bottom of the spa. The hose will be used to direct the water to a suitable drainage area, such as a garden or drain.

To attach the hose, remove the cap from the spigot and attach the hose securely to the spigot. Make sure the hose is long enough to reach your drainage area and is not kinked or bent in any way that could obstruct the flow of water.

It’s important to note that draining your Sundance spa can take several hours, so it’s recommended to plan accordingly and allow for enough time for the spa to fully drain. You can speed up the process by opening up any air relief valves or water jets in the spa to allow air to enter and water to flow more freely.

Step 2: Open the Drain Valve

Once you have the hose attached securely, it’s time to open the drain valve. Locate the valve on the bottom of the spa and turn it counterclockwise to open it. You may need to use pliers to get a good grip on the valve.

Be patient while the spa drains. Depending on the size of your spa and how full it is, this could take anywhere from a few minutes to several hours. You can use this time to clean the spa cover or do other maintenance tasks.

Make sure to keep an eye on the water level throughout the draining process. You don’t want the water to get too low and damage the spa’s plumbing or equipment.

Step 3: Drain the Spa Completely

Once the majority of the water has been drained out of the Sundance spa, you can use a wet/dry vacuum to get rid of any remaining water that may be in the spa. Start at the bottom of the spa and work your way up to get all of the water out.

After all of the water has been removed, it is a good idea to clean the spa shell with a non-abrasive cleaner to remove any remaining dirt or debris. This will help keep your spa in top condition and ready for the next use.

Finally, replace the filter cartridge if necessary and reinstall any components that were removed. Now that your Sundance spa is drained and cleaned, it is ready for maintenance or winterization.

Cleaning Your Sundance Spa

Regular cleaning of your Sundance Spa is crucial to keep it running efficiently and extend its lifespan. To keep your spa clean, you will need to clean the filter cartridge regularly and scrub the spa shell to remove any buildup of dirt and grime.

To clean the filter cartridge, remove it from the spa and rinse it with a hose to remove any debris. Then, soak it in a cleaning solution for several hours before rinsing it again with a hose and reinstalling it.

To clean the spa shell, drain the spa completely and then use a soft-bristled brush or sponge and a mild cleaning solution to scrub the entire shell. Pay special attention to the areas around the waterline, as this is where most of the buildup occurs.

Use a Spa Surface Cleaner to Clean the Interior Walls

Step 1: Turn off the spa and disconnect the power source.

Step 2: Apply the spa surface cleaner to the interior walls of the spa using a soft cloth or sponge.

Step 3: Allow the cleaner to sit on the walls for the recommended amount of time as indicated on the cleaner’s label.

Step 4: Using a soft brush, gently scrub the walls in a circular motion.

Note: Do not use an abrasive cleaner or scrubber as this can scratch the surface of the spa. Rinse the walls thoroughly with water to remove any cleaner residue.

Cleaning the interior walls of your Sundance spa is an essential part of its maintenance. Over time, the walls can accumulate dirt, grime, and other unwanted substances that can affect the quality of your spa experience. Using a spa surface cleaner is an effective way to remove these impurities and leave your spa looking and feeling fresh and clean.

Before you start cleaning, make sure to turn off your spa and disconnect the power source. This will prevent any accidents and ensure your safety. Apply the spa surface cleaner to the interior walls using a soft cloth or sponge, and allow it to sit for the recommended amount of time. Then, gently scrub the walls using a soft brush in a circular motion. Finally, rinse the walls thoroughly with water to remove any cleaner residue.

Remember to avoid using an abrasive cleaner or scrubber, as this can scratch the surface of the spa. Instead, use a gentle cleaner specifically designed for spa surfaces. This will help keep your spa looking great and functioning properly for years to come.

Refilling Your Sundance Spa

Step 1: Turn off Power to the Spa

Before refilling your Sundance spa, make sure to turn off the power to avoid any electrical hazards.

Step 2: Remove the Spa Cover

Remove the cover from your spa and set it aside in a clean, dry area.

Step 3: Fill the Spa with Water

Using a garden hose or other water source, fill your spa with water up to the recommended level indicated in your owner’s manual.

Step 4: Restart the Spa

Once the spa is filled with water, turn the power back on and restart the spa according to the instructions in your owner’s manual.

Step 1: Replace the Filter Cartridge

Filters are one of the essential parts of a Sundance spa that help to keep the water clean and clear. Over time, filters can become clogged with debris and other contaminants, which can reduce their effectiveness. To ensure optimal performance, it’s essential to replace the filter cartridge every six months or as recommended by the manufacturer.

Replacing the filter cartridge is a simple process that can be done in a few easy steps. First, turn off the power to the spa and remove the old filter cartridge. Then, insert the new filter cartridge, making sure it is seated properly in the filter housing. Finally, turn the power back on, and your Sundance spa is ready for use.

Regular maintenance of your Sundance spa’s filter cartridge can help extend its lifespan and keep your spa water sparkling clean. It’s also essential to clean the filter cartridge regularly and to use only recommended filter cleaners to prevent damage to the filter.

Step 2: Fill the Spa with Water

Check the water level: Before filling your Sundance spa with water, check the water level to ensure it’s not too high or too low. The water level should be halfway up the skimmer opening.

Turn on the water supply: Turn on the water supply and use a garden hose to fill your spa with water. Be sure to fill it to the appropriate level, as overfilling can cause damage to your spa.

Add chemicals: Once the spa is filled, it’s time to add the necessary chemicals to balance the water. Test the water and adjust the chemicals accordingly. This will ensure the water is safe to use and will help extend the life of your Sundance spa.

Allow the water to circulate: Turn on your spa’s circulation system to allow the water and chemicals to circulate evenly. This will help ensure the water is properly balanced and ready for use.

Restarting Your Sundance Spa

Inspect the Circuit Breaker: Ensure that the circuit breaker to your spa is turned off before you restart the spa. If the circuit breaker trips repeatedly, you may need to contact a professional electrician to fix the issue.

Refill Your Spa: Refill your spa with fresh water up to the appropriate level, following the manufacturer’s instructions. Check for any leaks before turning on the spa.

Power On the Spa: Turn on the circuit breaker to the spa, and then turn on the spa’s control panel. The spa may take some time to heat up, so be patient. Check the water temperature regularly to ensure that it is heating up properly.

Power On Your Sundance Spa

Before turning on the power to your Sundance Spa, ensure that all of the valves are in the correct position and the spa is full of water.

Once everything is in place, you can turn on the power to your spa by flipping the circuit breaker switch to the “on” position.

After the power is on, wait for the control panel to light up and display the temperature of the water.

Frequently Asked Questions