How to Deflate a Lazy Spa in 5 Easy Steps

Spread the love

Are you tired of having your lazy spa take up too much space in your backyard? Do you want to learn how to deflate it quickly and easily? Look no further! In this article, we will guide you through the 5 easy steps to deflating your lazy spa in no time.

Whether you’re moving homes or simply need to store your lazy spa away for the season, deflating it is a necessary task that can be intimidating for many people. But fear not, our step-by-step guide will make the process a breeze, leaving you with a neatly packed spa that is ready for storage.

So, let’s get started and learn how to properly deflate your lazy spa in just a few easy steps! By the end of this article, you’ll be a pro at deflating your spa and ready to move on to your next backyard project.

Prepare the Spa for Deflation

Before deflating your lazy spa, you need to make sure that you have all the necessary tools and materials ready. The first step is to turn off the power supply and unplug the spa from the electrical outlet. Next, you need to remove the spa cover and release any water that may be inside the spa.

Once you have released the water, you need to clean the spa’s interior and exterior with a non-abrasive cleaner. Be sure to remove any debris, dirt, or grime that may have accumulated on the surface. This will help protect the spa and ensure that it is ready for use when you need it again.

The third step is to remove any accessories that may be attached to the spa, such as the pump, heater, or control panel. This will make it easier to deflate the spa and fold it for storage. Be sure to read the owner’s manual to ensure that you remove the accessories correctly and without causing any damage.

Fourthly, you need to ensure that the spa is completely dry before deflating it. Use a dry cloth or towel to remove any remaining water or moisture from the spa’s surface. This will prevent any mold or mildew from developing while the spa is in storage.

Finally, you need to choose a suitable location to deflate the spa. Find a flat and dry area where you can lay out the spa for deflation. Make sure that the location is free from sharp objects or debris that could damage the spa during the deflation process.

Prepare the Spa for Deflation

Disconnect the Power Cord

  1. Unplug the power cord from the electrical outlet. This ensures your safety during the deflation process and helps prevent any electrical hazards.

  2. Remove the power pack cover, which is usually located near the spa. This allows you to disconnect the power cord from the pack itself.

  3. Trace the power cord’s length and make sure it is not underneath the spa before you start to deflate it. You don’t want to accidentally cut the cord during the process.

  4. Wrap the power cord and store it in a safe place. This protects it from damage and keeps it away from water or any other liquid during the deflation process.

  5. Label the power cord with a tag indicating that it belongs to your lazy spa. This makes it easier to identify and prevents confusion if you have multiple electrical devices in the area.

By following these steps, you will ensure that the spa’s electrical components are safe during the deflation process. This also prevents any potential hazards that may occur due to electricity and water mixing together.

Remove Accessories and Covers

Before deflating the Lazy Spa, it’s essential to remove all the accessories and covers. Accessories like cup holders, headrests, and filter cartridges can be taken out easily. Place them aside in a safe place to avoid losing them. For the covers, if they’re dirty or dusty, wipe them with a damp cloth before removing them to prevent debris from falling into the water.

  1. Remove the inflatable lid: Unscrew and remove the air valve cap, then press down on the lid to deflate it before folding it neatly.
  2. Take off the top cover: Unzip the top cover and remove it from the spa. Fold it neatly and store it in a dry and clean place.
  3. Remove the ground cover: Lift off the ground cover carefully and make sure it’s clean and dry before storing it.
  4. Take out the headrests: Grab the headrests on the sides and pull them out carefully, making sure not to damage them.
  5. Remove the cup holders: Gently twist the cup holders and lift them out of the spa’s walls. Store them with the other accessories.

Removing accessories and covers makes deflating the Lazy Spa easier and prevents damage to them. Keep them in a dry and clean place until the spa is ready for use again.

Check for any Damage or Leaks

Before you start deflating your lazy spa, you need to check it for any damage or leaks. Start by inspecting the exterior of the spa, looking for any cracks or tears in the material. Next, inspect the interior of the spa, looking for any signs of wear and tear, such as holes or punctures.

Check the valves and fittings for any damage or cracks. If you find any damage, it’s important to repair it before deflating the spa. If you have trouble locating the leak, you can try using a soapy solution to find any bubbles forming where the air is escaping.

It’s important to fix any damage or leaks before deflating the spa, as this will make it easier to deflate and store properly, and will also help prolong the lifespan of your lazy spa.

Pro tip: You can prevent damage to your spa by being careful with sharp objects and ensuring that it is not overinflated.

Drain the Spa Water

Step 1: Attach a hose to the drainage spout located at the bottom of the spa.

Step 2: Direct the other end of the hose to a suitable drainage area or a nearby gutter.

Step 3: Open the drainage valve and allow the water to flow out of the spa.

Step 4: Once the water has completely drained out of the spa, turn off the drainage valve and disconnect the hose.

Attach a Hose to the Drain Valve

Step 1: Find the drain valve at the bottom of the spa and make sure it is open.

Step 2: Attach one end of the hose to the drain valve and the other end to a nearby drainage point, such as a floor drain or exterior drain.

Step 3: Make sure the hose is securely attached to both the drain valve and the drainage point to prevent any leaks or spills.

Tip: If you don’t have a hose, you can use a submersible pump to drain the water from the spa.

Open the Drain Valve and Let the Water Flow Out

Step 1: Once the hose is securely attached to the drain valve, slowly turn the valve counterclockwise to open it. Be sure to direct the flow of water away from the spa and towards a safe drainage area.

Step 2: Allow the water to flow out completely. This may take some time depending on the size of your spa and the amount of water it contains. Keep an eye on the hose to make sure it doesn’t become kinked or blocked.

Step 3: Once all the water has drained out, close the drain valve by turning it clockwise. Double check to make sure it is tightly closed to prevent any water from leaking out during transport.

Step 4: Remove the hose from the drain valve and set it aside to dry. You may want to rinse it with clean water to remove any remaining debris before storing it.

Now that the spa is empty, it’s time to move on to the next step in deflating your lazy spa. Keep reading to find out how to release any remaining air and fold up the spa for storage.

Flush the Spa and Clean the Filters

Turn off the hose: Once you’ve finished flushing out the remaining water, turn off the hose.

Clean the filters: Remove the filters and clean them with a hose, ensuring all dirt and debris are removed. If necessary, soak the filters in a filter cleaner solution.

Rinse the spa: Using a hose, rinse the spa shell and seats to remove any remaining debris and flush out the remaining water.

Allow the spa to dry: Leave the spa uncovered and allow it to air dry completely before proceeding with deflation.

Release the Air Valves

Step 1: Locate the air valves on your spa. They are typically located near the top of the spa and may be labeled as “air valves” or “bleeder valves”.

Step 2: Use a flathead screwdriver or other suitable tool to turn the air valves counterclockwise. This will allow air to escape from the spa’s plumbing system.

Step 3: Wait for all the air to escape from the spa’s plumbing system. This may take several minutes depending on the size of your spa.

Step 4: Once all the air has been released, turn the air valves clockwise to close them. Make sure they are snug but do not overtighten.

Step 5: Turn the power back on to your spa and run the pump for a few minutes to make sure all the remaining water is flushed out of the plumbing system.

Locate the Air Valves

Before releasing the air valves, it is important to locate them. These are typically located near the top of the hot tub or spa, near the filter or pump. Look for small knobs or levers that are designed to turn or pull. Refer to the owner’s manual for exact location and instructions.

Inspect the valves: Check for any signs of wear or damage. If the valves are damaged, they may need to be replaced before releasing the air.

Turn off the power: Before releasing the air valves, make sure the power to the hot tub or spa is turned off. This will help prevent any accidents or injuries while working on the valves.

Prepare for water release: Releasing the air valves can cause water to spray out, so be sure to have towels or a bucket ready to catch any water that may come out.

Release the air valves: Once you have located the valves, turn them counterclockwise to release the air. You may hear a hissing sound as the air is released. Allow the air to release completely before turning the valves back to their original position.

Open the Air Valves and Let the Air Escape

Step 1: Locate the air valves on your spa. They are usually located near the top of the spa and may be covered with a cap that you can twist off.

Step 2: Twist the cap off the air valve to open it. You may hear a hissing sound as the air escapes from the valve. You should also see bubbles rising to the surface of the water in your spa.

Step 3: Let the air escape from the valve until no more bubbles are rising to the surface of the water in your spa. This may take several minutes, depending on the size of your spa and the amount of air trapped in the plumbing.

Step 4: Once all the air has escaped from the valve, close it by twisting the cap back on. Repeat this process for all the air valves on your spa.

Step 5: Turn on your spa’s power and check that all the jets are working properly. If you hear any strange noises or notice any issues, turn off the power and consult a professional.

Double-check for Any Remaining Air

  • Turn on the Jets: Turn on the jets to help remove any remaining air trapped in the lines.

  • Inspect the Water: Check the water for any signs of remaining air bubbles. If you see bubbles, turn on the jets again and repeat this step until the water is completely free of air bubbles.

  • Check the Pump: Check the pump to ensure that there is no remaining air inside. If there is air, turn on the jets again to help remove it.

  • Close the Valves: Once you are sure that there is no more air in the system, close the air valves tightly.

It’s important to make sure that all the air is removed from your hot tub before you start using it again. If there is any remaining air in the system, it can cause damage to the pump or other components. By following these steps, you can ensure that your hot tub is ready to use and will provide you with a relaxing and enjoyable experience.

Fold the Spa Neatly

Step 1: Once you have drained all the water and removed the air, it’s time to fold the spa.

Step 2: Start by removing any additional accessories or attachments that were connected to the spa.

Step 3: Fold the spa in half lengthwise, bringing the two opposite ends together.

Step 4: Once folded in half, roll the spa tightly from one end to the other, like a burrito.

Step 5: Use the spa cover to wrap around the rolled-up spa and secure it in place with straps or bungee cords.

Release any Remaining Air

If there is still air left in the spa, it’s important to release it to avoid any damage. Press down on the cover in different areas until you hear the sound of air escaping.

Another way to release any remaining air is to insert a flat object such as a credit card between the cover and the spa surface to allow air to escape.

  • Caution: Do not use sharp objects as they may puncture the spa cover or liner.
  • Note: If the spa is not fully deflated, it may be more difficult to fold and store.
  • Reminder: Check the manufacturer’s instructions for specific guidance on releasing air from your particular model of spa.
  • Tip: If you have difficulty releasing the air, try loosening the valves slightly to allow more air to escape.

By following these steps, you can ensure that your spa is properly deflated and ready to be stored until its next use.

Remove any Excess Water from the Spa

Dry the spa with towels. Start by using towels to soak up any standing water in the spa. Wring out the towels as you work so that they can continue to absorb water effectively. Use as many towels as necessary to remove as much water as possible.

If the spa is particularly large or there is a lot of water to remove, consider using a wet/dry vacuum. Wet/dry vacuums are designed to handle wet messes and can be effective for removing water from a spa quickly.

Air dry the spa. Once you’ve removed as much water as possible, allow the spa to air dry. Open any windows or doors to increase air flow and help the spa dry faster. You can also use a fan to speed up the drying process.

Store the Spa Safely

Clean and dry the spa: Before storing your spa, make sure it is completely clean and dry. This will prevent any mold, mildew or bacteria from growing and damaging the spa.

Choose a secure storage location: It’s important to store your spa in a safe and secure location, such as a garage or storage shed. This will help protect it from the elements and any potential damage.

Cover and protect the spa: Use a cover to protect your spa from dust, dirt, and debris. This will also help prevent any scratches or other damage to the surface of the spa.

Check on the spa regularly: Even when in storage, it’s important to check on your spa periodically. This will ensure it remains in good condition and any issues can be addressed promptly.

Choose a Suitable Storage Area

When choosing a storage area for your spa, make sure it is a dry, cool, and well-ventilated place. Keep it away from direct sunlight or any sources of heat, such as furnaces or water heaters. It’s also best to avoid areas with high humidity or where rodents and insects may be present.

Make sure the storage area is large enough to fit the spa without it being crammed in. This will help prevent any damage to the spa or cover during storage. You may also want to consider laying a tarp or plastic sheeting on the ground to protect the spa from moisture and dirt.

Protect the Spa from Dirt and Debris

Once your spa is safely stored, you’ll want to make sure it stays clean and protected from dirt and debris. Covering your spa is the easiest way to keep it clean and protect it from the elements. Choose a cover that is designed to fit your specific spa model and is made from durable materials.

In addition to covering your spa, you should also make sure the surrounding area is clean and free of debris. This will prevent dirt and other debris from getting inside the spa when you remove the cover.

Store the Spa in a Dry and Safe Place

Once you have thoroughly cleaned and dried the spa, you need to store it in a safe place where it won’t get damaged. Look for a dry and clean storage area away from direct sunlight or extreme temperature changes.

Make sure the storage area is free of any sharp objects or debris that could puncture or scratch the spa. If possible, cover the spa with a waterproof cover to protect it from dust and moisture.

If you are storing the spa for an extended period, it is recommended that you periodically check it for any signs of moisture or pests. You may also want to consider adding a dehumidifier to the storage area to prevent moisture buildup.

Proper storage of your spa will ensure it stays in good condition and is ready for use the next time you want to enjoy a relaxing soak.

Frequently Asked Questions

What are the steps to deflating a Lazy Spa?

The steps to deflating a Lazy Spa are quite simple and straightforward. It involves unplugging the pump, opening the air valves, and allowing the air to escape until the spa is fully deflated.

Do you need any special tools to deflate a Lazy Spa?

No, you do not need any special tools to deflate a Lazy Spa. All you need is the pump that came with the spa, a flat and stable surface to place the spa, and a power source to plug in the pump.

How long does it take to deflate a Lazy Spa?

The time it takes to deflate a Lazy Spa depends on the size of the spa and the power of the pump. However, it typically takes about 20-30 minutes to fully deflate the spa.

Can you partially deflate a Lazy Spa?

Yes, you can partially deflate a Lazy Spa if you do not want to fully deflate it. Simply open the air valves and allow some of the air to escape until the spa reaches the desired level of inflation.

Is it important to clean the spa before deflating it?

Yes, it is important to clean the spa before deflating it. This helps to remove any dirt, debris, or other materials that may cause damage to the spa during storage. It also ensures that the spa is in good condition when it is time to use it again.

What are some tips for storing a deflated Lazy Spa?

When storing a deflated Lazy Spa, it is important to keep it in a dry and safe place away from direct sunlight and extreme temperatures. It is also recommended to store the spa in a bag or cover to protect it from dust and other debris.

Do NOT follow this link or you will be banned from the site!