If you’re the lucky owner of a Viking Spa, you’re probably already enjoying the numerous health benefits that come with regular spa use. However, it’s crucial to know how to operate and adjust the settings on your spa to maximize your experience and keep your spa running efficiently. In this step-by-step guide, we’ll show you how to change the settings on your Viking Spa with ease.
Whether you’re a first-time spa owner or just need a refresher, our guide will cover all the basics. We’ll walk you through the process of accessing the spa’s control panel, navigating the menu, and adjusting the temperature settings.
But that’s not all; we’ll also show you how to set the filter cycles, change the light settings, and program additional features. With our guide, you’ll be able to customize your spa experience to your preferences and get the most out of your Viking Spa.
So, whether you’re looking to relax after a long day or soothe your sore muscles, keep reading to learn how to change the settings on your Viking Spa and get the ultimate spa experience.
Table of Contents
Step 1: Accessing the Spa’s Control Panel
If you want to change the settings on your Viking Spa, the first step is to access the control panel. The location of the control panel can vary depending on the model of your spa, but it is usually located on the top of the spa’s surface. Carefully remove the cover of the control panel to reveal the buttons and display screen.
Before touching any of the buttons, take a moment to familiarize yourself with the control panel. The display screen will show you the current temperature of the water, the filtration cycle status, and any error codes. You can navigate through the different menu options using the control buttons located below the display screen. Remember to be gentle with the buttons and avoid using excessive force.
If the control panel is not functioning correctly, you may need to perform a hard reset. To do this, turn off the spa’s power at the circuit breaker for at least 30 seconds. Then turn the power back on and check if the control panel has reset. Double-check that the control panel is working properly before continuing with any adjustments.
If you are having trouble accessing the control panel, you may need to check if the spa’s lock is engaged. Many Viking Spa models come with a lock feature that can be activated to prevent unauthorized use. Check the owner’s manual for instructions on how to unlock the spa’s control panel. Make sure to keep the lock feature activated when the spa is not in use to prevent accidents.
Once you have successfully accessed the control panel, you can begin adjusting the spa’s settings to your preferences. Keep in mind that making frequent adjustments to the settings can impact the longevity of the spa’s components. It is recommended to only make changes when necessary and to consult the owner’s manual for guidance on proper maintenance.
Step 1: Accessing the Spa’s Control Panel
Locating the Control Panel
The first step in changing the settings on your Viking Spa is to locate the control panel. The location of the control panel may vary depending on the model of your spa, but it is usually located near the top of the spa, within easy reach while sitting in the water. Look for a rectangular panel that houses the spa’s control system.
Some models of Viking Spas have a control panel located on the outside of the spa cabinet. If your spa has an exterior control panel, it will be located on the side of the spa, usually near the top. Look for a small rectangular panel with buttons and a display screen.
If you are having trouble finding the control panel on your Viking Spa, consult the owner’s manual for your specific model. The owner’s manual will have a detailed diagram of the spa, including the location of the control panel.
Note: Before accessing the control panel, make sure the power to the spa is turned off. This will prevent any accidental changes to the settings while you are working on the control panel.
Troubleshooting Tip: If the control panel is not responding or the display is not working, check to make sure the spa is properly connected to a power source.
Step 2: Navigating the Control Panel Menu
After accessing the control panel, you’ll see a menu with various options. To navigate this menu, use the arrow buttons labeled “up” and “down” to scroll through the options.
Once you find the setting you want to adjust, press the “enter” button to select it. From there, you can use the arrow buttons to increase or decrease the value of the setting.
It’s important to note that the menu may look slightly different depending on the model of your Viking Spa. However, the basic navigation steps should be the same.
Understanding the Display Screen
When accessing the control panel, you will be greeted by a display screen that provides various information about the spa’s settings. The display screen usually shows the current water temperature, time, and any active modes.
Make sure to take note of any error codes or warning messages that may appear on the screen. These codes can indicate issues with the spa that may require troubleshooting or professional assistance.
To navigate the control panel menu, you will typically use a combination of directional buttons and a select button. The display screen will guide you through the menu options, and you can make selections by pressing the select button.
Accessing the Control Panel Menu
To access the control panel menu on your Viking Spa, you will need to locate the control panel first. Once you have found the control panel, follow these simple steps to access the menu:
- Press the “Menu” button located on the control panel.
- Use the “Up” and “Down” arrow buttons to navigate through the menu options.
- Press the “Enter” button to select the desired menu option.
- Use the arrow buttons to navigate through the submenu options.
- Press the “Enter” button to select the desired submenu option.
Once you have selected a submenu option, you can adjust the settings by using the arrow buttons to increase or decrease the value, or by using the on/off buttons to enable or disable the feature.
Step 3: Adjusting the Temperature Settings
One of the most important aspects of your spa experience is the temperature of the water. Viking spas allow you to adjust the temperature to your liking with ease.
To begin, locate the temperature control button on the control panel. This button will typically have a thermometer icon on it and can be adjusted by pressing the up or down arrow keys.
It is important to note that the maximum temperature setting for most Viking spas is 104 degrees Fahrenheit (40 degrees Celsius), which is the recommended limit for safe soaking. Keep this in mind when adjusting the temperature settings.
Increasing/Decreasing Temperature
To adjust the temperature settings, press the “Temp” button on the control panel. The current temperature setting will appear on the display screen. To increase the temperature, press the “Up” button, and to decrease the temperature, press the “Down” button.
You can adjust the temperature in increments of one degree by pressing the “Up” or “Down” button repeatedly. If you hold down the button, the temperature will change more quickly. Once you have reached your desired temperature, the spa will maintain that temperature until you change it again.
Keep in mind that it can take some time for the spa to heat up or cool down, so be patient when making adjustments to the temperature settings. It is also important to avoid setting the temperature too high or too low, as this can be dangerous and cause damage to the spa and your skin.
Activating Economy Mode
If you’re looking to save energy and money on your spa, the Economy Mode is a great feature to use. Here are the steps to activate it:
- Step 1: Access the Control Panel Menu.
- Step 2: Scroll down to the “Economy” option.
- Step 3: Use the arrow keys to select “On.”
- Step 4: Press the “Set” button to save the changes.
Once you’ve activated the Economy Mode, the spa’s heater will only run during filtration cycles, which will save you money and reduce your energy consumption. Keep in mind that this feature may take longer to heat up your spa, so plan ahead if you want to use it.
Now that you know how to adjust the temperature and activate the Economy Mode, you can customize your Viking Spa to your preferences. Enjoy the relaxation and therapeutic benefits of your spa while also saving money and energy!
Setting the Temperature Scale
Another important feature of the control panel is the ability to set the temperature scale to either Celsius or Fahrenheit. To do this, access the settings menu on the control panel and locate the temperature scale option.
- Selecting Celsius: To set the temperature scale to Celsius, simply select the Celsius option on the control panel and save the settings.
- Selecting Fahrenheit: To set the temperature scale to Fahrenheit, select the Fahrenheit option on the control panel and save the settings.
- Choosing the right temperature scale: Make sure to choose the temperature scale that you are most comfortable using and familiar with, to ensure that you are accurately monitoring the temperature of your spa.
It’s important to note that once you have set the temperature scale on your spa’s control panel, all temperature readings will be displayed in the chosen scale.
Step 4: Setting the Filter Cycles
Filters are an essential part of your pool’s upkeep. They remove debris, bacteria, and other contaminants from the water. It’s important to set the filter cycles to ensure that your pool stays clean and healthy.
Most pools have a timer that controls the filter cycles. You can adjust the timer to run the filter for a specific amount of time each day. The amount of time you need to run the filter will depend on the size of your pool and how often it’s used.
Variable-speed pumps are becoming more popular as they offer better energy efficiency. These pumps allow you to set the speed at which the water is pumped through the filter. By adjusting the speed, you can run the filter for longer periods without using more energy.
Setting the Duration of Filter Cycles
The duration of filter cycles can be adjusted to your preference using the control panel menu. Press the menu button and select filter cycles. Choose the desired duration of the cycle by pressing the + or – buttons. Each press of the button will adjust the duration by 30 minutes.
It is recommended to set the filter cycle duration to at least 6 hours per day. However, the actual duration required may vary depending on factors such as pool usage, weather conditions, and local regulations. Consult your pool manufacturer or a professional pool service provider for recommendations.
Once the desired duration has been set, press the menu button to save the settings and return to the main menu.
Activating Filter Cycles
To activate filter cycles, go to the control panel and press the Filter button. The screen will display options for Filter 1, Filter 2, and Filter 3. Choose the desired filter and press the On/Off button to activate it. The system will display the duration of the filter cycle and the frequency of the cycle.
By default, the filter cycles are set to run daily for 8 hours. You can adjust the duration and frequency of the filter cycles by following the steps outlined in the section “Setting the Duration of Filter Cycles”.
It is important to keep the filter cycles active to maintain the cleanliness and efficiency of the system. Neglecting the filter cycles can result in reduced performance, higher energy consumption, and potential damage to the system.
Step 5: Changing the Light Settings
Most hot tubs come equipped with various light settings that allow you to adjust the color and brightness of the lights. To change the light settings, follow these steps:
Step 1: Locate the light button on the control panel. The button is usually labeled “Light” and can be found near the temperature controls.
Step 2: Press the button to turn on the lights. The lights will cycle through the default settings, which typically include a mix of colors.
Step 3: Press the button again to stop the cycling and select a specific color. Keep pressing the button to cycle through the available colors.
Step 4: Hold down the button to adjust the brightness of the lights. Some hot tubs may also have options to adjust the speed or pattern of the light cycling.
Step 5: When you have selected the desired light setting, press the button again to turn off the light mode and save your settings.
It is important to note that not all hot tubs have the same light settings, and the controls may vary from one model to another. Always consult your owner’s manual for specific instructions on how to change the light settings on your hot tub.
Adjusting Light Brightness
If you prefer brighter or dimmer lights, you can adjust the brightness level of your hot tub’s lights. Here are the steps to do so:
- Step 1: Turn on your hot tub and wait for the lights to turn on.
- Step 2: Locate the light control button. This is typically labeled with a lightbulb icon.
- Step 3: Press the button once to turn on the lights and cycle through the different brightness levels. Keep pressing the button until you find the desired brightness level.
- Step 4: Once you have found the desired brightness level, wait a few seconds for the lights to settle on that level. The lights will then stay at that level until you change it again.
Note that some hot tubs may have different ways to adjust light brightness, such as a separate control panel or remote control. Check your hot tub’s user manual for specific instructions.
Sure, here you go:Step 6: Programming Additional Features
Customizing your spa experience: Programming additional features on your hot tub is one of the best ways to get the most out of it. Features such as massage jets, music systems, and waterfalls can all be programmed to activate at certain times or intervals, giving you a customized spa experience.
Creating a maintenance schedule: Regular maintenance is critical to ensure your hot tub stays in top shape. By programming additional features such as reminders for filter replacements, water changes, and other maintenance tasks, you can keep your spa running smoothly and minimize the risk of any costly repairs.
Controlling energy consumption: Many hot tubs come equipped with energy-saving features that can be programmed to help you save on your energy bills. Features such as programmable pumps, timers, and sleep modes can all be customized to your specific needs, helping you to reduce energy consumption and save money in the long run.
Setting Sleep Mode
If you plan to use your device less frequently, you can set the sleep mode to conserve energy. Sleep mode is a power-saving state that automatically turns off non-essential components to save energy when the device is not in use. This feature can significantly reduce your energy consumption and, in turn, lower your electricity bill.
To activate sleep mode, navigate to the settings menu on your device and locate the “Sleep” option. From there, you can choose the duration of inactivity before the device enters sleep mode. It is recommended to set the duration to a relatively short period to maximize energy savings.
While in sleep mode, the device will consume minimal power, and it will quickly resume normal operation once you wake it up. This feature is particularly useful for devices that are not in constant use, such as printers or secondary monitors.
Programming the Spa’s Waterfall Feature
Understanding the Waterfall Feature: The waterfall feature adds a tranquil and beautiful element to your spa experience. Before programming it, it’s important to know the different ways the waterfall can be customized. You can adjust the flow rate, speed, and height of the waterfall, and program it to turn on and off at certain times.
Setting up the Waterfall: To program the waterfall feature, first, you need to make sure it’s properly installed and connected. Then, locate the waterfall setting on your spa’s control panel. You can usually find this under the “Water Features” or “Accessories” menu.
Customizing the Waterfall: Once you access the waterfall setting, you can begin to customize it to your liking. Use the arrow buttons or touch screen to adjust the flow rate, speed, and height. You can also set the waterfall to turn on and off at specific times, like during your daily spa routine or during parties.
Activating the Spa’s Massage Jets
The massage jets on your spa are an essential part of the relaxation experience. Here’s how to activate them:
- Locate the control panel for the massage jets.
- Press the “jet” button to turn on the jets.
- Adjust the flow and intensity of the jets to your desired setting.
- After use, turn off the jets and ensure they are properly cleaned to prevent buildup of debris and bacteria.
It’s important to remember not to run the jets for more than 15 minutes at a time to prevent overheating and potential damage to the spa’s motor. Additionally, always follow the manufacturer’s instructions for maintenance and cleaning to keep your spa functioning properly.
Frequently Asked Questions
What are the basic steps for changing the settings on a Viking Spa?
Changing the settings on a Viking Spa involves several steps, including adjusting the temperature, setting the filtration cycles, and programming additional features.
How do you adjust the temperature on a Viking Spa?
To adjust the temperature on a Viking Spa, you will need to locate the control panel and navigate to the temperature settings. From there, you can use the buttons to increase or decrease the temperature to your desired level.
What is the process for setting the filter cycles on a Viking Spa?
Setting the filter cycles on a Viking Spa involves navigating to the filtration settings on the control panel, selecting the appropriate cycle length and frequency, and activating the filter cycles to keep your spa water clean and clear.
What other features can be programmed on a Viking Spa?
In addition to temperature and filter cycles, Viking Spa owners can program a range of features, including sleep mode, waterfall feature, and massage jets, to enhance their spa experience.
Do Viking Spas have any unique features or settings?
Yes, Viking Spas offer a variety of unique features, including adjustable waterfalls, LED lighting, and specialized massage jets, which can be customized to meet the needs and preferences of individual spa owners.