Are you ready to properly maintain your Lay Z Spa and ensure it lasts for years to come? One important aspect of Lay Z Spa maintenance is knowing how to drain it properly. If you’re not sure where to begin, don’t worry, we’ve got you covered.
With this ultimate guide, you’ll learn the step-by-step process on how to drain your Lay Z Spa like a pro. We’ll cover everything from why it’s important to drain your spa, to when you should do it, and the tools required for the job.
By the end of this guide, you’ll know exactly what to do to keep your Lay Z Spa in top condition, ready for your next relaxing soak. So, let’s get started!
Ready to become a Lay Z Spa maintenance pro? Keep reading to learn how to drain your spa like a pro and keep it in top condition!
Table of Contents
Why is it important to drain your Lay Z Spa?
Regular maintenance is key to ensuring your Lay Z Spa lasts for years to come. Draining your spa is an essential part of this maintenance, but why is it so important?
Firstly, over time, bacteria, dirt, and debris can build up in the water, which can cause unpleasant odors, skin irritations, and other health issues. Draining your spa removes all of the dirty water, allowing you to start fresh with clean water.
Prevent damage to your spa
Leaving water in your spa for extended periods of time can cause damage to the spa and its components. Over time, the water chemistry can become unbalanced, leading to corrosion and damage to the pump, heater, and other parts. Draining your spa regularly helps prevent this damage and extends the life of your spa.
Maintain water chemistry
Draining your Lay Z Spa is also necessary to maintain proper water chemistry. Over time, the chemicals you add to your spa can build up and become less effective, leading to cloudy water and an unpleasant odor. By draining and refilling your spa, you can ensure the chemicals are properly balanced, providing clean and clear water.
How to drain your Lay Z Spa
- Turn off the power to your spa.
- Attach a hose to the drainage outlet on your spa.
- Place the other end of the hose in a suitable drainage location.
- Remove the drain cap or plug from the spa.
- Allow the water to drain completely from the spa.
- Rinse the spa thoroughly with clean water before refilling.
By following these simple steps, you can drain your Lay Z Spa like a pro and keep it in top condition.
When should you drain your Lay Z Spa?
Draining your Lay Z Spa is an essential maintenance task to ensure that your hot tub remains clean and hygienic. However, you may be wondering how often you should do it. The answer depends on several factors, including how often you use your hot tub and how well you maintain it.
Here are some general guidelines to help you determine when to drain your Lay Z Spa:
Frequency of use
- If you use your hot tub daily, you should drain and refill it every three to four months.
- If you use your hot tub less frequently, you can stretch the time between drainings to every six months.
Water quality
The water quality is another important factor in determining when to drain your Lay Z Spa. If you maintain your hot tub water correctly and keep it properly balanced, you may be able to extend the time between drainings. However, if the water becomes cloudy, foamy, or develops an unpleasant odor, it’s time to drain and refill the hot tub.
Seasonal changes
The change of seasons can also impact when you should drain your Lay Z Spa. In warmer months when you’re using your hot tub more often, you may need to drain and refill it more frequently. On the other hand, during colder months when you use it less, you may be able to go longer between drainings.
By following these guidelines and keeping an eye on the water quality and frequency of use, you can determine when to drain your Lay Z Spa to ensure that you always have a clean and safe hot tub to enjoy.
What are the tools required to drain your Lay Z Spa?
Draining your Lay Z Spa is essential for maintaining its longevity and keeping the water clean. Here are the tools you’ll need to do it:
Hosepipe
A hosepipe is needed to drain the water from the spa. A regular garden hose will work fine, but make sure it’s long enough to reach from the spa to a drain or suitable area where the water can be emptied.
Submersible Pump
A submersible pump can be used to speed up the process of draining the spa. It attaches to the end of the hosepipe and pumps out the water more quickly. This is particularly useful if you have a larger spa or if you need to drain it frequently.
Towels and Cleaning Products
After the spa is drained, it’s essential to clean it thoroughly. You’ll need towels and cleaning products, such as chlorine or bleach, to remove any dirt or bacteria that has built up in the spa’s walls and floor.
Step-by-step guide: How to drain your Lay Z Spa
Draining your Lay Z Spa is a necessary task that should be done regularly to maintain the cleanliness and longevity of your hot tub. Below is a step-by-step guide on how to drain your Lay Z Spa.
What you will need
- Submersible pump: This is used to pump out the water from the hot tub.
- Garden hose: This is used to direct the water to the desired location, such as a nearby drain or lawn.
- Bucket or scoop: This is used to remove any debris or water that may be left over after draining.
Steps to drain your Lay Z Spa
Step 1: Turn off the power to the hot tub by unplugging it from the electrical outlet.
Step 2: Locate the drainage valve on the outside of the hot tub. It is usually located near the bottom of the tub and may have a cap covering it.
- Tip: If your Lay Z Spa does not have a drainage valve, you can use the hose adapter that came with your hot tub to connect a garden hose to the drain outlet and siphon the water out.
Step 3: Remove the cap from the drainage valve and attach the submersible pump to it.
- Tip: If the drainage valve is not easily accessible, you can use a submersible pump with a long hose to reach it.
Step 4: Place the submersible pump into the hot tub and turn it on. The water will start to be pumped out through the garden hose.
- Tip: If the water level is too low for the pump to function properly, you can use a bucket or scoop to remove the remaining water.
Step 5: Once all of the water has been pumped out, turn off the pump and disconnect it from the drainage valve.
Step 6: Use a bucket or scoop to remove any remaining water or debris from the hot tub.
Step 7: Rinse the hot tub with clean water and let it air dry before refilling it with fresh water.
Following these steps will ensure that your Lay Z Spa is properly drained and ready for its next use.
How to properly clean and store your Lay Z Spa after draining?
After draining your Lay Z Spa, it’s important to properly clean and store it to ensure it stays in good condition for future use. Here are some steps to follow:
Step 1: Use a non-abrasive cleaner and a soft cloth to clean the inside of the spa. Be sure to scrub away any dirt or grime that may have accumulated during use. Rinse thoroughly with clean water.
Step 2: Remove the filter cartridge and give it a thorough cleaning. Use a garden hose to remove any debris and then soak it in a filter cleaner solution for a few hours. Rinse it thoroughly with clean water and let it air dry completely before reinstalling it.
Storing Your Lay Z Spa
Step 3: Once your Lay Z Spa is clean and dry, it’s time to store it. First, make sure that all the water has been completely drained from the spa. Use a wet/dry vacuum or a sponge to soak up any remaining water.
- For inflatable spas, deflate the spa and fold it neatly into the storage bag that came with it. Make sure it’s completely dry before storing it.
- For hard-shell spas, make sure the cover is securely in place and locked. Store it in a dry, cool place, away from direct sunlight and extreme temperatures.
By following these steps, you can ensure that your Lay Z Spa is properly cleaned and stored after use, which will help extend its lifespan and ensure it’s in good condition for future use.
Conclusion
Properly cleaning and storing your Lay Z Spa is important for maintaining its performance and ensuring it lasts for years to come. Be sure to follow these steps after draining your spa to keep it in top condition.
Expert tips and tricks for maintaining your Lay Z Spa
Regular maintenance of your Lay Z Spa is crucial for its longevity and performance. Here are some expert tips and tricks for keeping your spa in top condition.
Balance the chemicals
Regularly test the water in your spa and adjust the chemicals as necessary to maintain a healthy pH balance. Use a water test strip to measure the levels of chlorine, pH, and alkalinity. You should aim for a pH level between 7.2 and 7.8, and a chlorine level between 1 and 3 parts per million (ppm).
Clean the filter
The filter is responsible for keeping your spa water clean and clear. Clean the filter cartridge regularly with a garden hose or filter cleaner to remove any debris or buildup. It’s also a good idea to replace the filter cartridge every few months to ensure maximum efficiency.
Protect the spa
- Keep the cover on when the spa is not in use to protect it from the elements.
- Use a spa pad or base to protect the bottom of the spa from damage.
- Regularly check the spa for leaks or damage and repair as necessary.
Use the spa responsibly
- Do not use the spa if you have any open wounds or infections.
- Shower before entering the spa to remove any oils, lotions, or perfumes.
- Do not use the spa if you are under the influence of drugs or alcohol.
By following these expert tips and tricks, you can ensure that your Lay Z Spa remains in top condition for years to come.
Frequently Asked Questions
How do I drain my Lay Z Spa?
To drain your Lay Z Spa, first, ensure that the power supply is switched off and the control unit is disconnected. Then, locate the drainage valve on the exterior of the spa and attach a garden hose. Open the valve and let the water drain out completely. It is recommended to clean the spa before refilling it.
Can I leave my Lay Z Spa filled with water during winter?
No, it is not recommended to leave your Lay Z Spa filled with water during winter. The water can freeze and cause damage to the spa’s components. It is important to properly drain and store the spa during the winter months to protect it from damage.
How often should I clean my Lay Z Spa?
It is recommended to clean your Lay Z Spa every 2-4 weeks, depending on how often you use it. This involves using a non-abrasive cleaner and a soft cloth to clean the surfaces of the spa, as well as removing any debris from the water with a skimmer net or vacuum.
What type of chemicals should I use to maintain my Lay Z Spa?
It is important to use the recommended chemicals for your Lay Z Spa, which can be found in the owner’s manual or obtained from the manufacturer. This may include chlorine, bromine, or other chemicals to maintain the pH and alkalinity of the water.
How often should I change the water in my Lay Z Spa?
It is recommended to change the water in your Lay Z Spa every 2-3 months, depending on how often you use it. This helps to maintain the quality of the water and prevent the buildup of bacteria and other contaminants.
What should I do if my Lay Z Spa is not heating up?
If your Lay Z Spa is not heating up, first check that the power supply is switched on and the control unit is properly connected. If this does not solve the issue, check the water level and ensure that the filters are clean. If the problem persists, contact the manufacturer for further assistance.