If you’re a proud owner of a Lazy Spa, you’re probably aware that it’s important to drain and clean it regularly. While the process might seem intimidating at first, it’s actually quite simple and straightforward. In this article, we’ll walk you through the easiest way to drain your Lazy Spa and get it ready for cleaning and maintenance.
Before we dive into the details, it’s important to note that draining your spa is essential for keeping it clean and maintaining its longevity. Regular maintenance ensures that your spa stays free from dirt, bacteria, and other contaminants that can cause skin irritations or damage the spa’s components.
With that said, let’s get started and learn how to drain a Lazy Spa quickly and easily, so you can get back to relaxing in your sparkling clean tub.
Keep reading to discover some essential tips and tricks for preparing your Lazy Spa for a drain and clean. Whether you’re a seasoned spa owner or a beginner, you’ll find some valuable insights that will help you get the most out of your Lazy Spa.
Table of Contents
Preparing for the Drain
Before draining your Lazy Spa, you should ensure that you have all the necessary equipment at hand. The first thing you will need is a garden hose, preferably one that’s long enough to reach a drainage area. Additionally, you will need a submersible pump, a pair of gloves, a bucket, and a cleaning agent to sanitize your spa.
The next step is to turn off the spa’s power and unplug it from the outlet. This is a crucial safety measure that will protect you from electric shock. Once you have disconnected the power, you should remove the cover and set it aside. Depending on the size of your Lazy Spa, you may need to have an extra pair of hands to help you remove the cover.
Now it’s time to clean your Lazy Spa before draining it. Use a soft brush or sponge to scrub the walls, seats, and floor of your spa. Make sure you pay close attention to any areas with stains or debris. Once you have cleaned the spa, it’s time to remove the filter. Refer to your owner’s manual to locate the filter, then remove it and set it aside.
It’s now time to drain the spa. Connect your garden hose to the spa’s drainage valve and make sure the other end is in a safe drainage area. If the spa is too far from the drainage area, you may need to use a submersible pump to help with the draining process. You can place the pump in the spa and let it do the work while you monitor the drainage.
As the water drains, use a bucket to remove any remaining water that is not draining. This will help speed up the process. Once the water has drained, you can turn off the pump and disconnect the garden hose from the drainage valve.
Preparing for the Drain
Turn Off the Power
Before draining your Lazy Spa, make sure to turn off the power to the spa unit. This will prevent any accidental electrocutions while you are draining the water. Locate the power source of your Lazy Spa and turn off the power switch. If your spa unit doesn’t have an external power switch, turn off the power supply from the main circuit breaker.
Tip: It’s important to wait at least 30 minutes after turning off the power before starting to drain the water. This allows the spa’s heating elements to cool down, reducing the risk of burns or damage to the spa.
After turning off the power, remove the Lazy Spa’s cover and skim any debris from the surface of the water with a skimming net. This will help prevent any dirt or leaves from getting into the drainage system and clogging it up.
- Step 1: Locate the power source of your Lazy Spa.
- Step 2: Turn off the power switch.
- Step 3: Wait at least 30 minutes for the heating elements to cool down.
- Step 4: Remove the spa cover and skim any debris from the surface of the water.
Once you have completed these steps, you are ready to begin draining the water from your Lazy Spa.
| Step | Action | Tip |
|---|---|---|
| Step 1 | Locate the power source of your Lazy Spa. | Wait at least 30 minutes for the heating elements to cool down. |
| Step 2 | Turn off the power switch. | |
| Step 3 | Remove the spa cover and skim any debris from the surface of the water. | |
| Step 4 | Begin draining the water from your Lazy Spa. | Make sure to drain the water in a safe area, away from any structures or landscaping that could be damaged by the water. |
Locate the Drain Valve
The first step in draining your lazy spa is to locate the drain valve. This is typically located at the bottom of the spa and can be identified by a small valve or plug.
If you are having trouble finding the drain valve, consult your spa’s manual or contact the manufacturer for assistance. It is important to locate the valve before you begin draining the water.
Make sure you have a clear path to the valve and remove any obstacles that may be in your way. This will make the draining process smoother and more efficient.
Once you have located the valve, check to see if it is functioning properly. If there are any leaks or other issues, you may need to repair or replace the valve before you can drain the spa.
Prepare the Equipment
Before starting the draining process, gather all the necessary equipment to make it go smoothly. Make sure you have a good quality garden hose that is long enough to reach the drain location. You’ll also need a submersible pump or a siphon pump to remove the water.
It’s important to have a pair of pliers and a wrench on hand to help loosen and tighten the drain plug. A bucket or a wet/dry vacuum can be useful for removing any remaining water in the tub. If you plan on cleaning the spa after draining, gather cleaning supplies such as a scrub brush, spa cleaner, and a sanitizing solution.
Tip: It’s a good idea to have a helper when draining the spa, especially if it’s a large one. This will make it easier to move the hose and pump, and to handle any unexpected situations that may arise.
Warning: Never use a regular vacuum to drain a spa, as it can damage the equipment and pose an electrical hazard.
Draining the Water
Step 1: Attach the Hose
Attach a garden hose to the drain valve of the spa. Ensure that the hose is long enough to reach the drainage area.
Step 2: Open the Drain Valve
Slowly open the drain valve and let the water flow out through the garden hose. Keep an eye on the water level and adjust the hose if needed.
Step 3: Drain the Water
Depending on the size of your spa, it may take several hours to drain completely. Make sure to periodically check on the progress.
Step 4: Remove Any Debris
While the water is draining, use a skimmer net or vacuum to remove any debris or dirt that has accumulated in the spa.
Step 5: Turn Off the Pump
Once all the water has drained out, turn off the pump and remove the garden hose from the drain valve.
Attach a Hose
Locate the drainage port: The drainage port is usually located at the bottom of the spa. It might be covered by a cap or a filter.
Attach the hose: Place the hose in the drainage port, making sure it fits snugly. If the hose doesn’t fit, you can use an adapter to make it fit.
Extend the hose: Extend the hose to an area that can handle the volume of water. A nearby drain is ideal, but if that is not possible, use a sloping lawn or flowerbed.
Secure the hose: Make sure the hose is secure and won’t come loose during the draining process.
Open the Drain Valve
Once the hose is securely attached, locate the drain valve on your Lazy Spa and make sure it is closed. The drain valve is usually located on the exterior of the spa near the bottom.
Slowly open the drain valve by turning it counterclockwise. Be sure to do this slowly, as opening it too quickly can cause water to rush out too quickly and potentially damage the spa.
Let the water drain out completely. Depending on the size of your spa, this can take anywhere from 30 minutes to several hours. It’s important to be patient and let the spa drain completely to avoid any potential damage or issues.
Once the water has drained out completely, turn off the drain valve by turning it clockwise until it’s closed. Remove the hose from the drain valve and store it in a dry place for future use.
Removing the Remaining Water
Use a Wet Vacuum – Once most of the water has been drained, use a wet vacuum to remove the remaining water. Place the hose of the vacuum into the spa and turn it on. Move the hose around to ensure all the water is sucked up.
Use a Bucket – If you don’t have a wet vacuum, you can use a bucket to remove the remaining water. Scoop out the water with the bucket and pour it down the drain. Repeat this process until all the water is gone.
Wipe the Interior – After all the water has been drained, use a clean cloth or sponge to wipe down the interior of the spa. Make sure to get any remaining water and debris out of the corners and crevices.
Dry the Interior – Once the interior has been wiped down, use a dry towel to dry it completely. This will prevent any moisture from remaining in the spa and causing damage or mold.
Clean the Filter – Don’t forget to remove and clean the filter during this process. Rinse it with clean water and let it dry completely before replacing it back into the spa.
Use a Wet/Dry Vacuum
If there’s still water left in your lazy spa after draining it, a wet/dry vacuum can help you remove the remaining water. Start by attaching the vacuum hose to the vacuum’s outlet port.
Next, put the vacuum hose into the spa, making sure it reaches the bottom of the spa. Turn the vacuum on and wait for it to suck up the remaining water. Keep an eye on the vacuum’s water level, and when it gets full, turn off the vacuum and empty it.
Repeat this process until you’ve removed all the water from the spa. Don’t forget to use the vacuum on any crevices or hard-to-reach areas.
Remember, safety always comes first when using electrical equipment. Be sure to follow the manufacturer’s instructions and take all necessary precautions to avoid injury or damage to your lazy spa.
Using a wet/dry vacuum is a great way to ensure that all the water has been removed from your lazy spa before you store it away. With this method, you can be confident that your spa will be in good condition when you’re ready to use it again.
Wipe the Interior with Towels
Prepare the towels: Use several towels to wipe the interior of the water heater tank. Make sure they are clean and absorbent to remove all remaining water and sediment.
Remove any remaining water: Use the towels to soak up any remaining water inside the tank, including around the drain valve and heating elements.
Clean the tank: Wipe the inside of the tank with the towels to remove any sediment or debris that may have accumulated at the bottom of the tank.
Once you have wiped the interior of the tank with towels, you may also want to consider using a flashlight to inspect the tank for any signs of damage or corrosion. If you notice any issues, it may be best to consult a professional for further inspection or repair.
Cleaning and Sanitizing the Spa
Chemical Treatment: Before cleaning the spa, check the pH and chlorine levels, and add any necessary chemicals to balance them. Follow the instructions carefully, as each product may have different application rates and methods.
Scrubbing: Use a non-abrasive cleaner and a soft-bristled brush to scrub the interior surfaces of the spa. Pay special attention to the waterline, as this area tends to accumulate dirt and grime. Rinse thoroughly with water after scrubbing.
Sanitizing: After cleaning the spa, it’s important to sanitize it to prevent the growth of bacteria and other harmful microorganisms. There are various types of spa sanitizers available, such as bromine, chlorine, and mineral purifiers. Choose the one that suits your preference and follow the instructions for use.
Add Spa Cleaner
Before cleaning your spa, it is important to add a spa cleaner to the water. This will help to break down any organic matter that may be present, making it easier to remove.
Read the instructions on the cleaner carefully, and add the appropriate amount to the water. Be sure to circulate the water for at least an hour to ensure the cleaner is evenly distributed throughout the spa.
Some cleaners may require you to wait for a certain amount of time before continuing the cleaning process. Check the instructions carefully and follow them closely to ensure the best results.
Scrub the Interior
After letting the spa cleaner work its magic, it’s time to scrub the interior. Use a soft-bristled brush to scrub the entire interior, paying extra attention to any areas with stubborn stains or buildup.
Remember to use a gentle touch and avoid scrubbing too hard, as this could damage the spa’s surface. You can also use a sponge or cloth to reach smaller areas or corners.
For tough stains, you may need to use a specialized cleaning product or a mixture of baking soda and water. Apply the cleaner to the affected area and let it sit for a few minutes before scrubbing.
Once you’ve scrubbed the entire interior, use a hose to rinse away any remaining cleaner or debris. Make sure to rinse thoroughly and double-check that all cleaning products have been completely removed.
Refilling the Spa
Turn off the Hose: Once the water level reaches the fill line, turn off the hose.
Replace the Filter: It is a good idea to replace the spa filter after draining and cleaning the spa.
Restore Power: Reconnect the power to the spa and turn it on.
Check Chemical Levels: Test the water chemistry and adjust the chemicals as necessary.
Turn on the Water
Step 1: Make sure the drain valve is closed and all equipment is turned off before turning on the water.
Step 2: Slowly turn on the water source and fill the spa until it reaches the desired water level.
Step 3: While filling, monitor the water level and ensure that the water is not overflowing from the spa.
Step 4: Once the spa is filled to the desired level, turn off the water source and disconnect the hose.
Frequently Asked Questions
What are the steps to drain a Lazy Spa?
Draining a Lazy Spa involves several steps, including turning off the power, draining the water, and removing any remaining water.
What should you do before draining a Lazy Spa?
Prior to draining the Lazy Spa, you should turn off the power and unplug the spa to prevent any accidents.
How do you drain the water from a Lazy Spa?
To drain the water from a Lazy Spa, you can use the attached drain valve or attach a hose to the drain valve and direct the water to an appropriate location.
What is the next step after draining the water from a Lazy Spa?
After draining the water from a Lazy Spa, it is important to remove any remaining water using a wet/dry vacuum or towels to prevent damage or mold growth.
Why is it important to clean and sanitize a Lazy Spa?
Cleaning and sanitizing a Lazy Spa is important to maintain hygiene and prevent the growth of bacteria, viruses, and other harmful microorganisms that can cause health problems.
How can you refill a Lazy Spa after draining and cleaning it?
To refill a Lazy Spa, you can turn on the water supply and fill the spa to the desired level while monitoring the temperature and chemical balance of the water.