Deflate Lay Z Spa Hot Tub in 5 Easy Steps

Spread the love

Welcome to our step-by-step guide on how to deflate your Lay Z Spa hot tub. After enjoying a soothing soak, you might wonder how to remove the air and pack it away for storage. With these five easy steps, you’ll be able to deflate your Lay Z Spa hot tub without hassle.

Deflating your Lay Z Spa hot tub can seem daunting at first, but with our guide, you’ll be able to complete the task in no time. This process is essential to keep your hot tub in good condition and ready to use again when the weather is warm.

Follow these steps, and you’ll be able to store your hot tub efficiently and with ease. Keep reading to find out how to do it in five simple steps.

Ready to get started? Let’s dive into the details and find out how to deflate a Lay Z Spa hot tub in five easy steps.

Step 1: Release the Air Valve

Before you begin deflating your Lay Z Spa hot tub, make sure you turn off the heater and unplug the spa from the power outlet. This will ensure that you don’t accidentally turn on the heater or pump during the deflation process. Once you have done this, locate the air valve on the side of the hot tub.

Using the valve wrench provided with your Lay Z Spa, turn the air valve counterclockwise to release the air. You should hear a hissing sound as the air escapes from the hot tub. If you don’t hear a hissing sound, check to make sure the valve is open all the way.

As the hot tub deflates, you can press down on the sides of the tub to help push the air out. This will speed up the deflation process and help ensure that all the air is removed from the tub.

Once the hot tub is fully deflated, you can remove the inflation hose from the air valve. Be sure to tighten the valve back up to prevent any air from leaking back in.

Tip: If you have trouble removing the inflation hose from the air valve, try pushing down on the valve while pulling out the hose. This should help release any remaining air in the hose and make it easier to remove.

Now that you have successfully released the air valve and removed the inflation hose, you are ready to move on to the next step in deflating your Lay Z Spa hot tub.

Step 1: Release the Air Valve

Locate the Air Valve

Before deflating your Lay Z Spa hot tub, you need to locate the air valve. The air valve is typically located near the inflation hose on the top of the hot tub.

Once you’ve located the air valve, you need to release the air pressure. This is an essential step to avoid damaging your hot tub during deflation.

Make sure to have your air pump ready before you begin this process. This will make it easier to release the air pressure and speed up the deflation process.

Some hot tub models have more than one air valve. If your hot tub has more than one air valve, you will need to release the air pressure from all valves.

Tip: You can use a screwdriver or another small tool to help you locate the air valve if you’re having trouble finding it.

Open the Air Valve

Once you have located the air valve, it’s time to open it up. Take off the cover and twist the valve counterclockwise to release the air. You should hear a hissing sound as the air begins to escape. Don’t be alarmed, this is completely normal and indicates that the deflation process has started.

Make sure to keep your hand on the valve to prevent it from closing accidentally. The air pressure in the hot tub will gradually decrease, and the sides of the tub will start to collapse. This is a good sign that the air is escaping and the tub is deflating properly.

It’s important to note that opening the air valve may take some time, especially if the hot tub is fully inflated. Be patient and let the air escape naturally. Don’t try to force the air out by pressing down on the sides or jumping on the tub. This can damage the hot tub and make it harder to deflate.

  1. Twist the valve counterclockwise to release the air.
  2. Keep your hand on the valve to prevent it from closing accidentally.
  3. Let the air escape naturally and don’t try to force it out.

Remember to keep an eye on the hot tub as it deflates to make sure that everything is going smoothly. If you notice any unusual sounds or movements, stop the deflation process and inspect the tub for damage.

Now that the air valve is open, it’s time to move on to the next step in deflating your Lay Z Spa hot tub.

Step 2: Remove the Inflation Hose

Removing the inflation hose is the next step to deflating your Lay Z Spa Hot Tub. This hose connects the hot tub to the air pump or blower and is used to inflate the tub.

To remove the hose, start by unplugging it from the hot tub. Then, slowly and carefully remove the other end of the hose from the pump or blower.

Make sure to remove the hose gently so that you don’t damage it, as you will need it again in the future when you want to inflate the hot tub.

Once you have successfully removed the hose from both ends, store it in a dry and safe place.

With the hose out of the way, you can now move on to the next step of deflating your Lay Z Spa Hot Tub.

Unscrew the Hose Connector

Locate the inflation hose connector on the Lay Z Spa hot tub. This is usually located on the side of the hot tub. Ensure that the air valve is still open before you begin unscrewing the connector.

Place one hand on the connector to keep it steady and use your other hand to unscrew the connector in a counterclockwise direction.

Be careful not to damage the connector or the hose while you are unscrewing it. You may want to use a pair of pliers if the connector is stuck or difficult to unscrew.

Once the connector is removed, be sure to put it in a safe place where you won’t lose it. You will need it again when you want to inflate the hot tub.

Remove the Inflation Hose from the Valve

Step 1: Firmly grasp the inflation hose where it connects to the valve and pull it straight out.

Step 2: Gently wiggle the hose back and forth if it feels stuck or difficult to remove.

Step 3: If the hose is still difficult to remove, use a pair of pliers to grip the connector and carefully twist it back and forth while pulling to loosen it from the valve.

Step 4: Avoid pulling or yanking the hose forcefully, as this could damage the valve or the hose itself.

Step 3: Attach the Deflation Hose

Once the inflation hose has been removed, it’s time to attach the deflation hose. The deflation hose will allow air to escape quickly and easily from the Lay Z Spa.

First, locate the deflation valve on the side of the hot tub. The deflation valve will look similar to the inflation valve but will be marked with a minus sign instead of a plus sign.

Next, attach the deflation hose to the valve by screwing it onto the connector. Make sure it’s tightly screwed in place to prevent any air from escaping around the edges.

Once the hose is attached, you’re ready to start deflating the Lay Z Spa.

Connect the Deflation Hose to the Air Valve

Before attaching the deflation hose, make sure the air valve is completely open and all air is released. Then, connect the hose to the valve by screwing it on clockwise until it is snug.

It’s important to ensure the hose is tightly connected to prevent any air from escaping during the deflation process. Check the connection by gently pulling on the hose to make sure it is secure.

Once you have connected the deflation hose to the air valve, you’re ready to move on to the next step of deflating your Lay Z Spa hot tub.

Tighten the Hose Connector

Once the deflation hose is connected to the air valve, it is important to tighten the hose connector to prevent air from escaping. Use a wrench or pliers to tighten the connector until it is snug. Be careful not to over-tighten, as this can cause damage to the valve or the hose.

Make sure to check that the connector is secure before proceeding with the deflation process. If the connector is loose, air may escape and cause the deflation process to take longer than necessary.

If you notice any leaks, stop the deflation process and check the connector for damage. It may be necessary to replace the connector or hose to ensure a proper seal.

Step 4: Turn on the Air Blower

Now that your swimming pool has been properly cleaned and the chemicals are balanced, it’s time to turn on the air blower. The air blower is essential to maintaining the cleanliness of your pool. It helps to circulate the water and keeps it from becoming stagnant.

Before turning on the air blower, make sure that the filter is clean and that the pool’s water level is at the appropriate level. If the water level is too low, the air blower can cause the pool’s water level to drop even further.

Once you’ve verified that everything is in order, turn on the air blower. The air blower should be run for at least 6 hours a day, or longer if you have a larger pool or live in an area with high levels of dust and debris.

While the air blower is running, keep an eye on the water level. If the water level drops too low, turn off the air blower and add more water to the pool. It’s important to maintain the proper water level to ensure that the air blower can function properly.

If you notice that the air blower is not functioning properly or making unusual noises, turn it off and check for any blockages or obstructions. If you are unable to resolve the issue, contact a professional pool maintenance company for assistance.

Switch on the Power

  1. Locate the power switch for your pool’s equipment. This switch is usually located near the pool’s filter system. Turn on the power switch to activate the equipment, including the pool pump, filter, and any other accessories you may have.

  2. Check the power supply for your pool equipment. Make sure that the power supply is in good working condition and is not damaged in any way. Any damage to the power supply can result in electrical problems, which can be dangerous for you and your family.

  3. Make sure that all equipment is properly grounded. Improper grounding can result in electrical shock or fire hazards. If you are unsure about how to properly ground your equipment, consult a professional pool maintenance company.

Once you have switched on the power, check to make sure that all equipment is functioning properly. Listen for any unusual noises or vibrations. If you notice any issues, turn off the power and investigate the problem.

Activate the Air Blower Pump

  • Before activating the air blower pump, ensure that the air relief valve is open to release any trapped air in the system. If you do not do this, the air blower pump can become damaged due to excessive pressure.

  • Next, turn on the air blower pump by pressing the power button on the control panel. Make sure that the pump is running smoothly and there are no unusual noises or vibrations.

  • Check the air bubbles coming from the jets to ensure that the blower is functioning properly. If you notice any issues with the air blower pump, turn off the power and investigate the problem.

It is important to monitor the air blower pump during use to ensure that it is functioning properly. If you notice any issues, such as a decrease in air pressure or a change in the sound of the pump, turn off the power and inspect the system.

Step 5: Fold and Store

After the inflatable structure has been deflated and the air blower pump has been turned off, it’s time to fold and store the structure.

Start by removing any debris or dirt that may have accumulated on the inflatable structure during use. This will help prevent any damage or wear and tear when folding the structure.

Next, begin folding the inflatable structure by starting from one end and folding it towards the other end. Make sure to fold it tightly and avoid any creases or wrinkles in the material.

Once the inflatable structure has been folded, use the included straps or ties to secure it in place. This will prevent it from unfolding or becoming damaged during storage.

Finally, store the inflatable structure in a dry and cool place, away from any sharp objects or sources of heat. This will help prolong its lifespan and ensure it’s ready for the next use.

Wait for the Spa to Deflate

Once you’ve turned off the air blower, it’s time to wait for the spa to deflate. This can take anywhere from 10 to 30 minutes, depending on the size of your spa and the air pressure inside. During this time, you can start cleaning up any remaining debris around the area.

While you’re waiting, it’s important not to touch the spa or move it around. If you do, you could cause damage to the valves or the walls of the spa. Additionally, make sure that any pets or children stay away from the spa until it’s completely deflated.

As the spa begins to deflate, you may hear some air escaping from the valves. This is normal and nothing to be concerned about. Once the spa is fully deflated, the air blower can be removed and stored for the next use.

If you’re planning on storing the spa for an extended period of time, it’s important to make sure it’s completely dry before folding it up. Any moisture left inside the spa could cause mildew or other types of damage. Use a clean cloth to wipe down the inside of the spa and leave it out in the sun for a few hours to dry.

Once the spa is fully deflated and dry, it’s time to fold it up for storage. Refer to the manufacturer’s instructions for specific folding directions, but in general, you’ll want to start by folding the spa in half lengthwise, then in half again. Roll it up tightly and secure it with the straps provided.

Fold the Spa Neatly and Secure with Straps

Step 1: Remove any remaining water from the spa using a towel or a wet/dry vacuum. Make sure that the spa is completely dry before folding it.

Step 2: Fold the spa neatly in half lengthwise, then fold it again in half widthwise. Make sure that the sides are even and the folds are neat.

Step 3: Secure the folded spa with the straps provided. Wrap the straps around the spa and tighten them until the spa is secure and won’t unfold.

Step 4: Store the folded spa in a dry, cool place. Avoid exposing it to direct sunlight or extreme temperatures. Keep it away from sharp objects that could puncture the material.

Store the Spa and Accessories in a Dry Place

Step 1: Once the spa has been deflated and folded, remove any remaining water and debris from both the spa and accessories. Use a clean cloth or towel to dry them off completely.

Step 2: Find a dry and cool storage location for the folded spa and accessories. Avoid direct sunlight and damp areas to prevent any mold or mildew from growing.

Step 3: Make sure the folded spa and accessories are stored in a secure and stable position. You can use straps or bungee cords to keep them in place.

  • Tip: Store the spa and accessories in a dedicated storage container or bag to keep them clean and protected.
  • Tip: If storing the spa and accessories outside, cover them with a waterproof tarp or cover to protect them from the elements.
  • Tip: Label the storage container or bag with the contents and date of storage for easy identification and organization.

Frequently Asked Questions

What are the steps to deflate a Lay Z Spa Hot Tub?

Deflating a Lay Z Spa Hot Tub is a simple process that involves turning off the heater and air blower, removing the plug, and folding and storing the tub. The specific steps can be found in the instructions manual or online tutorial videos.

Do I need any special tools to deflate the Lay Z Spa Hot Tub?

No, you do not need any special tools to deflate a Lay Z Spa Hot Tub. All you need is access to an electrical outlet to power the air blower and the ability to follow the step-by-step instructions for deflating and storing the tub.

How long does it take to deflate a Lay Z Spa Hot Tub?

The amount of time it takes to deflate a Lay Z Spa Hot Tub can vary depending on the size of the tub and the efficiency of the air blower. Generally, it can take anywhere from 20 minutes to an hour to fully deflate and fold the tub.

Can I store my Lay Z Spa Hot Tub outside?

It is not recommended to store a Lay Z Spa Hot Tub outside, especially during periods of extreme weather. It is best to store the tub in a dry, sheltered area, such as a garage or shed, to prevent damage to the tub and its components.

Can I reuse the water in my Lay Z Spa Hot Tub?

It is not recommended to reuse the water in a Lay Z Spa Hot Tub due to the risk of bacterial growth and contamination. It is recommended to fully drain and refill the tub with fresh water each time it is used.

Do NOT follow this link or you will be banned from the site!